Archive for the ‘PCB News’ Category

Continued to my last blog, do you know why we want to talk more for Gold surface finish of rigid Boards? I would like to take this chance to share more information for the capability from Best Technology.

Electroless nickel immersion gold (ENIG) is a type of surface plating used for printed circuit boards. It consists of an electroless nickel plating covered with a thin layer of immersion gold, which it can protects the nickel from oxidation. It is also used for welding and applied to contacts (such as keys, gold fingers on memory strips, etc
See attached complexity design for ENIG FR4 printed circuit board.

ENIG has several advantages over more conventional (and cheaper) surface plating such as HASL (solder), including excellent surface planarity (particularly helpful for PCBs with large BGA packages), good oxidation resistance, and usability for untreated contact surfaces such as membrane switches and other contact points. See the complex circuit boards design photo.

ENIG also does not wet as evenly or easily as HASL. In addition, ENIG is a costlier finish, but offers the best characteristics for printed circuit boards. The process requires the most steps compared to other common finishing types.
The thickness of Gold Best Technology conforms to IPC Standard IPC-6013.
Let us see the different for gold finish.

Gold-ENIG
The most important factor the gold serves as barrier and protectant to the nickel.
Advantages of ENIG

Immersion finish = excellent flatness
Good for fine pitch / BGA / smaller components from Samtec/Hirose/Molex
Wire bondable
Good heat dissipation
Long shelf Life (12 months in vacuum pack)

Disadvantages of ENIG
Expensive finish
Black Pad/Black Nickel concerns on BGA
Damage from ET (electronics test)
Signal Loss (RF)
Complicated Process

Gold-Hard Gold

Advantages of ENIG
Hard, Durable Surface
No Pb
Long shelf life

Disadvantages of ENIG
Very Expensive
Extra Processing/ Labor Intensive
Use of more solder Resist/Tape
Plating/ Bus Bars
Demarcation(delamination)
Difficulty with other surface finishes.

As an rich experience PCB manufacturer since 2006, Best Technology always improve its Rigid Circuit boards capability to meet customer requirements, If you have any question about the printed circuit boards (PCBs). Warmly welcome to send mail or call Best Tech.

We all know that both Prepreg (PP) and CORE are important parts for the printed circuits board. And they are also very common on the PCB structure.

But what exactly they are? What’s the difference of a PP and Core for a FR4 PCB?

Prepreg, referred to as PP, it is a sheet material impregnated with resin and cured to an intermediate level (B-stage), known an insulating material for the PCB board.
As a prepreg material while the PCB production process, before lamination, it is mainly used as an adhesive material and insulating material for the inner conductive pattern of a multilayer PCB.

After the Prepreg is laminated, the semi-cured epoxy resin is squeezed away, starts to flow and solidify, bonding the multilayer circuit boards together, and forming a reliable insulator.

PP, it is placed between the two copper layers to isolate and make the two copper layers adhere. Below picture for you to see where the PP is on a PCB stack up.

And CORE, it is totally different as the Prepreg.

Core is with certain hardness and specified thickness, and with copper foil in both sides.
It is the basic material for making printed circuits boards, and the multilayer PCB board is actually made by pressing Core and Prepreg.
Sometimes, when people are talking about the Copper Clad Laminate (CCL), they also refer to the CORE.

And here is the major difference for the PP and Core:

1. Prepreg is stayed with a semi-solid material in a PCB, similar to cardboard. But core is different, core is hard, similar to copper;
2. Prepreg is similar to adhesive + insulator; while Core is the basic material of PCB, they have completely different functions;
3. PCB Prepreg can curl, but PCB Core cannot bend;
4. Prepreg is non-conductive, and the core has a copper layer on both sides, which is the conductive medium for a PCB board.

As an PCB manufacturer with more than 15 years experiences in China, Best Technology insists on using the best Copper Clad Laminate ( CCL) materials to make the PCB, no matter Prepreg or CORE, we will select the best FR4 materials for the PCB manufacturing, to make sure all the PCB boards we supplied to customers are with qualified materials and to be your best PCB suppliers in China.