pcb
Home > Blog

Archive for the ‘Our News’ Category

Best Technology Participates in the American Exhibition
Wednesday, September 12th, 2018

Since established in 2006, Best Technology has gone through 12 years. During the 12 years, we grow up from a little baby to a strong man. And we are always dedicated to provide customers with the most suitable products and the most satisfactory services. In order to seize the chance and expand the foreign market, Best Technology made a big step in 2018. This time we arrived at Santa Clara Convention Center in America with all kinds of PCB samples for the exhibition–PCB West 2018. The exhibition will begin on September 12th of American Time, which is the first time that our company has exhibited in the United States.

Our booth

Our booth

The Santa Clara Convention Center belongs to the Silicon Valley Center of the United States, so there will be a lot of engineers and purchaser come to visit. By the way, our booth number is 608, and we sincerely invite you come to visit.

Best always be your best choice of PCB and PCBA in China.

0.15mm 2L Extra Thin PCB
Saturday, September 8th, 2018

The extra thin printed circuit means the thickness of printed circuit board is thinner than the normal PCB. For most of FR4 PCB, min thickness is 0.3mm or 0.4mm, whatever it is 1L or 2L. For 4L, it will be more about 0.6mm.

But sometimes, limited to space or margin, or needed by design purpose, people needs extra thin such as 0.25mm, 0.20mm, or even 0.15mm board. For providing customers with the most suitable products and the most satisfactory services, Best Technology also made the extra thin printed circuit.

For this 2L FR4 PCB, we are able to make it to 0.15mm±0.1mm. Then you can use it in SIM card, sensor card and so on. As shown, it can also be rotated 180 degrees.

0.15mm 2L Extra Thin PCB

Picture1: 0.15mm 2L Extra Thin PCB

Besides, we are able to provide the extra thin PCB with or without soldermask, and copper thickness for 1/2OZ, 1OZ. It depends on the needs of the customers.

 

Extra thin 0.2mm

Picture2: Extra thin 0.2mm

Since established in 2006, Best Technology is always dedicated to provide the most suitable products and the most satisfying service for customers, to be customers’ best partner of PCB and PCBA in China.

Tiny Pad for the Single Side Ceramic Board
Wednesday, September 5th, 2018

  In order to become the most creditable partner of customers, Best Technology is dedicated to develop the products that can meet the market all the time.The ceramic board has good prospects in the market because of its advantages. To begin with, it has resistance in very high or very low temperature (-55℃-850℃). What’s more, it is good in dissipation and thermal.

  For providing customers with the most suitable products and the most satisfactory services, Best Technology made a new single side ceramic board currently. It has a layer white solder mask in front and 1.0mm aluminum nitride in the back. Maybe it seems like aluminum substrate from the obverse side, but turning around you can know it is a ceramic board.

The obverse and the reverse side of the sample

Picture1:The obverse and the reverse side of the sample

  The most distinctive feature of it is that the pads on the surface are very tiny, and each small pad is combined into a circle just like the earth. Compared with other ceramic boards, the circuit of it is very small, too.

  The ceramic board has various advantages, it also can be applied in high power LED, solid state relay, electric power transmitter modules and so on.

  The specifications as below:

  The thickness of the copper: 35um

  1.0mm aluminum nitride

  ENIG

  Application temp: -55℃-850℃

  If you want to know more details about the ceramic board, please visit our website: https://www.bestpcbs.com/products/ceramic-pcb.htm

American customers visited Best Technology
Thursday, August 30th, 2018

Providing customers with the most suitable products and the most satisfactory service is our mission. The high quality service of our company has attracted many customers to visit. On Aug. 9th, 2018, it was really our honor to have the nice American customers visiting Best Technology.

Taking a photo in Best Technology office
Picture1: Taking a photo in Best Technology office
Visiting the drilling house
Picture2: Visiting the drilling house

We have met each other before. The point to the meeting was to discuss the matters that something need to pay attention to cooperation in the follow-up. What’s more, they would like to get more information about our products, such as thick film ceramic PCB, thin film ceramic PCB and DCB Ceramic PCB.

Board routing process
Picture3: Board routing process

Meanwhile, the customers also wanted to visit our factory of printed circuit board to see the production process and capacity of the printed circuit board. So after the short meeting, we took the customers to visit the different workshops of production and explained the details that need to be paid attention to in each process of production.

  The customers were really satisfied with our services and looked forward to our next cooperation.

New ERP System Leads the New Breakthrough of Best Technology
Thursday, August 30th, 2018

  Best Technology always holds the mission that provides customers with the most suitable products and the most satisfactory service, so our company decided to launch the new ERP system in September 2018.

  With the expansion of the market, the demand for printed circuit board is increasing to a higher level. The increase in orders is especially in the products of printed circuit board, such as single layer MCPCB, COB MCPCB, two (double) layers MCPCB, double Sided MCPCB and so on. The launch of the new ERP system will optimize the process from order to shipment and make the operations of business get faster and more convenient.

  During the training, the members spoke actively and participated in the practical operation of the ERP system.

Members are discussing
Picture1:Members are discussing
Explaining how to operate ERP system
Picture2:Explaining how to operate ERP system

  The training not only improves the understanding of situation in work, but also make the management of enterprise get more scientific. Besides, it also shows the company’s determination to become the most distinctive supplier of printed circuit board and metal dome solutions of Shenzhen in 2020.

Irish customer visit Best Technology on Aug. 28th, 2018
Wednesday, August 29th, 2018

On Aug. 28th, 2018, we had customers coming from Ireland. It is the first time that they have come to visit our company to see the samples. We talked about the current situation in UK and it will give our company more new chances to provide Circuit Boards to EU. Believe our Ceramic PCB will support them to develop more market in EU.

Customers see the samples in the meeting room

Customers see the samples in the meeting room

We also provide other kinds PCB to customers, such as Rigid-flex circuit, FPC, metal core PCB, Ceramic PCB , as well as some  special PCB,  Heavy copper PCB,  High Tg PCB,   PCB assembly  products.

After seeing the samples, we had a delicious lunch:

Having lunch with customers

Having lunch with customers

As a professional PCB vendor, Best Technology is always dedicated to provide the most suitable products and most satisfied services for customers. If you would like to know more information, please click here: https://www.bestpcbs.com/

UK Customer Visit Best Technology on Aug 9th, 2018
Friday, August 10th, 2018

It is quite a hot day Aug 9th, 2018. We have our nice UK customers visit us on such hot day. That’s really appreciated.
Both of them are very easygoing, we started to discuss the capability to manufacturing the 14 Layer PCB, customer were concern the impedance control well as well as other specification on the board such as the thickness of the immersion gold. Except FR4 PCB, We also showed other kinds PCB we made to customer, such as Rigid-flex circuit, FPC, metal core PCB, Ceramic PCB , as well as some  special PCB,  Heavy copper PCB,  High Tg PCB,   PCB assembly  products.

Best-Technology-Meeting-room
Picture1:Best-Technology-Meeting-room

After a short meeting in our office, we bring customer to see our PCB Manufacturing Production Line.
Firstly we showed customer our different Tests Equipment including Impedance Tester, Copper Thickness Tester, Gold thickness Tester, etc.

Best-Technology-Tester-Equipments
Picture2:Tester-Equipments

And then we bring customer to see the different process for how to make the PCB.
Developing Process

Developing-Process
Picture3:Developing-Process

Drilling Process

Drilling
Picture4:Drilling

E-Testing Process

E-testing
Picture5:E-testing

After that, we go to our QA line to showing customer how we do the board inspection before we send out the PCB to our customers.

Best-Technology-QA-process
Picture6:QA-process

Customer was very happy and satisfy with everything they see in our PCB Plant.

Photos-in-Best-Technology-office
Picture7:Photos-in-Best-Technology-office

Wish next time we’ll have chance to have lunch or dinner with customer to talk more.

The 12th Anniversary Celebration
Wednesday, July 11th, 2018

How time flies!

June 28th is the 12th birthday of Best Technology.

 

On this special day, we got together and had a big party to celebrate the successes of a year gone by and prepare for hard work to be rewarded in the new year.

When we think of yesterday, we never forget the sales amount is only $8,000.00 in 2006, but it will be around $8,000,000.00 this year.

Thanks to founder Peter and other member’s hard work, Best Technology keep growing day by day, and reach such a great achievements by far.

peter telling

Peter was telling us why we can make it.

The reasons are:

  1. We have rich experienceto manufacture Metal Core PCB (MCPCB), ceramic PCB and other kinds of PCBs, esp on some special boards such as heavy copper PCB (up to 30OZ), extra thin PCB (0.1-0.3mm), Rigid-flex circuits, so customers always only need to use us to meet all her different requirements of circuit boards.
  2. We have our own raw material factory for MCPCB, we can control the quality from sourcing the material.
  3. We can provide one-stop service(Manufacture PCB, source components and do SMT).
  4. The most important reason is we are alwayshold on to our mission: to provide customer the most suitable product and most satisfied services.

cheers

Picture:Cheers

We are not only a best team, but also a harmonious family, we are together to fight for a better future in the coming 12 years.

Welcome Israel Friends visit us
Friday, April 27th, 2018

In the morning of April 24th, 2018, our customer from Israel visited our company. They are very nice and easygoing.

Firstly we had a short meeting in our office to discuss some PCBA projects and component, also we invite them to see our company’s video, which they know more about our capability on PCB, Rigid-flex circuit, FPC, metal core PCB, Ceramic PCB and lead time for different circuit boards.

 

After that, we moved to our SMT plant, where is only 15 minutes far from our office.

In our PCB Assembly plant, we show customers PCBA (SMT) process: First put PCB on Auto-loading machine, then transfer to Auto-Solder-paste-printer, after than go to the next step of components pick & place by SMT machine, after visual checking, board will go throw to reflow oven, QC will check each piece of board after reflowing and then do function testing, or move to AOI process to make sure all components are on the correct position and direction, as well as X-ray testing for the boards with BGA.

 

Each step was monitor and operators are following up with the SOP, to make sure quality is always controlled, and customer are interesting in how we test the assembly boards using testing fixture.

 

 

Customer is very happy with our SMT procedure and become more confident in placing more circuit board and PCBA order with Best Technology. After the meeting, we have a quick but delicious Chinese lunch together. And we will visit that customer in the end of May and believe by that time, we can do more things together, as well as good memories with each other.

Appreciate again for their valuable time to visit us, that’s our great pleasure to have that forenoon with them. Look forward seeing them again in Israel in the end of May.

We always welcome customer to visit us, so that they can know about what we can make, not only providing various types of printed circuit board, but also always supporting customer best service with good price.

 

What we have learned from 《The seven habits of highly effective people》
Wednesday, April 25th, 2018

In order to improve the working efficient of management team and staffs, Best Technology provide《The seven habits of highly effective people》to each staff; This book can inspire you in working, life, management, family and your future development; Best Tech sales team has learned how to improve themselves and realized their sales target with good habits.

Metal Core PCB sales is sharing her report

Metal Core PCB sales is sharing her report

 

PCB sales girl said that there is still a lot of things need to be improved. We should apply the knowledge what we learn to practice.

Metal Core PCB sales tiffany

Metal Core PCB sales tiffany

In Best Technology, we had a series products such as: Metal Core PCB ( MCPCB) 、 Aluminum PCB, COB MCPCB, Copper PCB, Ceramic PCB, heavy copper board , HDI(1+N+1, 2+N+2, 3+N+3), Rigid-flex circuits, high TG, HDI, high frequency (Rogers, Taconic), impedance controlled board, PCBA (SMT), our sales girls talked about how to supply most suitable product and best service to customer, we should communicate with customer effective and know their demand.

2, In order to achieve excellent team job, we need to listen and understand the different opinion from our team members; also when handle different customers, we should respect different habits, culture background from different customers, and solve their problem effectively.

3, Company’s goal: Becoming the special and best PCB partner in Shenzhen area in 2020. Let’s keep our target in our mind and try to realize it.  Good habits can help you a lot and also provide customer’s best service, to achieve the final win-win.

Also employee from purchasing department, QC and warehouse department had their learning

Engineering department is sharing his report.

Engineering department is sharing his report.

Learn more, practice more, and improve efficient. Be successful in your future.

 

More sharing from Metal dome sales, FPC sales, Marketing department, warehouse, Human resource department, Finical department, QC..

After sharing, all the employee had more feeling on these 7 habits and know how to improve themselves in future. We will always on the way to become the most reliable partner of customer and the most satisfactory company of employee. Welcome to contact us to try our printed circuit board and metal dome industry.