{"id":932,"date":"2021-07-16T10:33:58","date_gmt":"2021-07-16T02:33:58","guid":{"rendered":"http:\/\/www.bestpcbs.com\/blog\/?p=932"},"modified":"2021-07-16T10:33:58","modified_gmt":"2021-07-16T02:33:58","slug":"how-to-make-panel-for-mcpcb","status":"publish","type":"post","link":"https:\/\/www.bestpcbs.com\/blog\/2021\/07\/how-to-make-panel-for-mcpcb\/","title":{"rendered":"How to make Panel for MCPCB?"},"content":{"rendered":"
<\/div>\n

Regarding all Metal core PCB<\/a> required panelization, which needs to take into account how the boards are connected. There are two main connection\u00c2\u00a0methods for panel: Double face carved V-shaped groove (V-CUT), and the long slot plus a small circular hole (commonly known as stamp hole), depending on the shape of the PCB.<\/p>\n\n\n\n

  1. V-CUT <\/strong><\/strong><\/li><\/ol>\n\n\n\n

    V-CUT is to draw a slot at the junction of two boards, where the connection of the boards is relatively thin and easy to break. Currently SMT Board<\/a> is widely used, characterized with neat and level edges after separation, which is recommended as priority.<\/p>\n\n\n\n

    V-cuts are generally straight lines, and there will be no complicated traces such as curved arcs, so pay attention to be in a straight line when making the panelization. Please also note the following two points.<\/p>\n\n\n\n

    \u00e2\u2018\u00a0 The two sides of V-CUT line (top side and bottom side) require a no circuits area that is not smaller than 1mm, to avoid the damage circuits when separating.<\/p>\n\n\n\n

    \u00e2\u2018\u00a1\u00c2\u00a0After cutting the V-shaped groove, the remaining thickness\u00c2\u00a0should be 1\/4 to 1\/3 of the total board thickness , which is not smaller than 0.4mm.<\/p>\n\n\n\n

    \"\"\/<\/a>
    V-Cut<\/figcaption><\/figure><\/div>\n\n\n\n