


{"id":39619,"date":"2026-11-21T11:08:19","date_gmt":"2026-11-21T03:08:19","guid":{"rendered":"https:\/\/www.bestpcbs.com\/blog\/?p=39619"},"modified":"2026-11-21T11:08:19","modified_gmt":"2026-11-21T03:08:19","slug":"phase-noise-guide","status":"publish","type":"post","link":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/phase-noise-guide\/","title":{"rendered":"Phase Noise Guide: Read, Measure and Compare Clocks"},"content":{"rendered":"<div id=\"ez-toc-container\" class=\"ez-toc-v2_0_89 ez-toc-wrap-left counter-hierarchy ez-toc-counter ez-toc-grey ez-toc-container-direction\">\n<div class=\"ez-toc-title-container\">\n<p class=\"ez-toc-title\" style=\"cursor:inherit\">Table of Contents<\/p>\n<span class=\"ez-toc-title-toggle\"><a href=\"#\" class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" aria-label=\"Toggle Table of Content\"><span class=\"ez-toc-js-icon-con\"><span class=\"\"><span class=\"eztoc-hide\" style=\"display:none;\">Toggle<\/span><span class=\"ez-toc-icon-toggle-span\"><svg style=\"fill: #999;color:#999\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" class=\"list-377408\" width=\"20px\" height=\"20px\" viewBox=\"0 0 24 24\" fill=\"none\"><path d=\"M6 6H4v2h2V6zm14 0H8v2h12V6zM4 11h2v2H4v-2zm16 0H8v2h12v-2zM4 16h2v2H4v-2zm16 0H8v2h12v-2z\" fill=\"currentColor\"><\/path><\/svg><svg style=\"fill: #999;color:#999\" class=\"arrow-unsorted-368013\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" width=\"10px\" height=\"10px\" viewBox=\"0 0 24 24\" version=\"1.2\" baseProfile=\"tiny\"><path d=\"M18.2 9.3l-6.2-6.3-6.2 6.3c-.2.2-.3.4-.3.7s.1.5.3.7c.2.2.4.3.7.3h11c.3 0 .5-.1.7-.3.2-.2.3-.5.3-.7s-.1-.5-.3-.7zM5.8 14.7l6.2 6.3 6.2-6.3c.2-.2.3-.5.3-.7s-.1-.5-.3-.7c-.2-.2-.4-.3-.7-.3h-11c-.3 0-.5.1-.7.3-.2.2-.3.5-.3.7s.1.5.3.7z\"\/><\/svg><\/span><\/span><\/span><\/a><\/span><\/div>\n<nav><ul class='ez-toc-list ez-toc-list-level-1 ' ><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/phase-noise-guide\/#What_is_phase_noise\" >What is phase noise?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/phase-noise-guide\/#Phase_noise_units_what_does_dBcHz_mean\" >Phase noise units: what does dBc\/Hz mean?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/phase-noise-guide\/#Phase_noise_plot_read_the_offsets_before_the_headline\" >Phase noise plot: read the offsets before the headline<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-4\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/phase-noise-guide\/#Phase_noise_vs_jitter_which_evidence_do_you_need\" >Phase noise vs jitter: which evidence do you need?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-5\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/phase-noise-guide\/#Phase_noise_to_jitter_a_calculation_you_can_check\" >Phase noise to jitter: a calculation you can check<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-6\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/phase-noise-guide\/#Phase_noise_measurement_with_spectrum_analyzer_check_the_floor\" >Phase noise measurement with spectrum analyzer: check the floor<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-7\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/phase-noise-guide\/#Phase_noise_measurement_cross_correlation_what_it_removes\" >Phase noise measurement cross correlation: what it removes<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-8\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/phase-noise-guide\/#Where_phase_noise_matters_applications_and_acceptance_checks\" >Where phase noise matters: applications and acceptance checks<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-9\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/phase-noise-guide\/#Reducing_phase_noise_use_a_comparison_worksheet\" >Reducing phase noise: use a comparison worksheet<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-10\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/phase-noise-guide\/#Phase_Noise_FAQs\" >Phase Noise FAQs<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-11\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/phase-noise-guide\/#Technical_References\" >Technical References<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-12\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/phase-noise-guide\/#Custom_RF_PCB_Manufacturing_with_Prototype_and_Assembly_Support\" >Custom RF PCB Manufacturing with Prototype and Assembly Support<\/a><\/li><\/ul><\/nav><\/div>\n<div class=\"yzp-no-index\"><\/div><p><strong>To compare phase noise, start with the carrier frequency, the offset range and the measurement conditions\u2014not one impressive number.<\/strong> A clock with lower noise at one offset can still produce more integrated timing uncertainty in the band your receiver or converter actually uses.<\/p>\n<p>This guide explains how to read a phase-noise plot, convert a defined noise spectrum into RMS jitter, and decide whether a measurement represents the oscillator or the instrument. The calculations are explicitly hypothetical; they are not measurements of a particular oscillator, PCB or customer&#8217;s product.<\/p>\n<figure><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2026\/11\/project426-phase-noise-hero.jpg\" alt=\"Phase Noise title above an illustrative oscillator PCB connected to generic test equipment\" style=\"max-width:100%;height:auto;display:block;\" width=\"1200\" height=\"800\"><figcaption>Illustrative clock-board measurement scene, not an instrument screenshot or verified DUT measurement.<\/figcaption><\/figure>\n<h2 style=\"text-align:left;word-break:normal;overflow-wrap:break-word;\"><span class=\"ez-toc-section\" id=\"What_is_phase_noise\"><\/span>What is phase noise?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Phase noise is short-term fluctuation in a signal&#8217;s phase. An ideal carrier would have perfectly predictable phase progression. A real oscillator departs from it, spreading noise around the carrier in the frequency domain and moving signal timing in the time domain.<\/p>\n<p>A useful model is v(t) = A cos[2\u03c0f<sub>0<\/sub>t + \u03c6(t)]. Here f<sub>0<\/sub> is the carrier frequency and \u03c6(t) is the phase fluctuation. This model separates phase variation from amplitude variation; a real measurement can contain both. Do not label every visible spectral skirt \u201cpure phase noise\u201d without checking the measurement method.<\/p>\n<p>The practical question is where that noise hurts. A sampling clock changes when an ADC captures a signal. A receiver&#8217;s local oscillator can spread energy from nearby interference into the wanted channel. A PLL reshapes different noise contributions. Those are related effects, but their acceptance conditions are not interchangeable.<\/p>\n<h2 style=\"text-align:left;word-break:normal;overflow-wrap:break-word;\"><span class=\"ez-toc-section\" id=\"Phase_noise_units_what_does_dBcHz_mean\"><\/span>Phase noise units: what does dBc\/Hz mean?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Single-sideband phase noise L(f) is noise power in a 1 Hz bandwidth at an offset f from the carrier, expressed relative to carrier power. Its usual unit is <strong>dBc\/Hz<\/strong>. More-negative values mean lower noise density under the same conditions.<\/p>\n<p>For example, \u201c\u2212140 dBc\/Hz at 100 kHz offset, 100 MHz carrier\u201d contains three essential facts. The carrier is at 100 MHz; the noise is examined 100 kHz away from it; the result is normalized to 1 Hz. It does not mean that the oscillator itself runs at 100 kHz or has \u2212140 dBm of total noise.<\/p>\n<p>Discrete spurs are different from a continuous noise density. Report a spur&#8217;s relative integrated power in dBc and its offset, and say whether the instrument includes it in integrated jitter. Copying a spur peak from a dBc\/Hz display without knowing its bandwidth handling can create a misleading comparison.<\/p>\n<h2 style=\"text-align:left;word-break:normal;overflow-wrap:break-word;\"><span class=\"ez-toc-section\" id=\"Phase_noise_plot_read_the_offsets_before_the_headline\"><\/span>Phase noise plot: read the offsets before the headline<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>The horizontal axis is usually logarithmic offset frequency, not the carrier frequency. The vertical axis is noise density. Read the conditions first, then examine close-in behavior, wider-offset noise and narrow spurs separately.<\/p>\n<p>A better value at 10 kHz does not establish a better value at 1 MHz. If two curves cross, the application determines which region matters. Also check whether the plot represents a free-running oscillator, a locked PLL, an output buffer or an entire clock path. A datasheet&#8217;s best operating mode may not be your selected mode.<\/p>\n<figure><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2026\/11\/project426-phase-noise-plot.jpg\" alt=\"Hypothetical flat phase-noise spectra A minus 140 and B minus 145 dBc per Hz from 10 kHz to 1 MHz\" style=\"max-width:100%;height:auto;display:block;\" width=\"1200\" height=\"800\"><figcaption>Analytical comparison only: both examples use a 100 MHz carrier and the same 10 kHz\u20131 MHz integration band. Real oscillators need their actual spectra.<\/figcaption><\/figure>\n<p>Before choosing a part, request the relevant plot or data table at your output frequency, supply, output format and loading. A single \u201ctypical jitter\u201d value with no integration limits is insufficient to reproduce the result.<\/p>\n<h2 style=\"text-align:left;word-break:normal;overflow-wrap:break-word;\"><span class=\"ez-toc-section\" id=\"Phase_noise_vs_jitter_which_evidence_do_you_need\"><\/span>Phase noise vs jitter: which evidence do you need?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Phase noise retains information about <em>where<\/em> fluctuations occur in frequency. Integrated RMS jitter compresses a specified part of that spectrum into one timing number. Neither is automatically the better specification; they answer different questions.<\/p>\n<table style=\"width:100%;table-layout:fixed;overflow-wrap:anywhere;\">\n<tbody>\n<tr>\n<td><strong>Decision<\/strong><\/td>\n<td><strong>Phase-noise evidence<\/strong><\/td>\n<td><strong>Timing evidence<\/strong><\/td>\n<\/tr>\n<tr>\n<td>Compare RF local oscillators<\/td>\n<td>Noise at offsets related to channel separation and interference, plus spur limits<\/td>\n<td>A single integrated number can hide the important offset region<\/td>\n<\/tr>\n<tr>\n<td>Budget sampling-clock uncertainty<\/td>\n<td>Integrate the relevant spectrum with the clock path&#8217;s filtering understood<\/td>\n<td>RMS clock jitter can enter a qualified converter noise calculation<\/td>\n<\/tr>\n<tr>\n<td>Find edge-to-edge timing behavior<\/td>\n<td>Useful background, but not a substitute for all time-domain metrics<\/td>\n<td>Measure the specified TIE, period or cycle-to-cycle quantity<\/td>\n<\/tr>\n<tr>\n<td>Compare supplier claims<\/td>\n<td>Match carrier, offsets, output mode and spur treatment<\/td>\n<td>Match integration limits and definition before comparing RMS values<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Use the <a href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/jitter-measurement-guide\/\">jitter measurement guide<\/a> for the differences between TIE, period and cycle-to-cycle measurements. Converting phase noise to one RMS value does not make those quantities identical.<\/p>\n<h2 style=\"text-align:left;word-break:normal;overflow-wrap:break-word;\"><span class=\"ez-toc-section\" id=\"Phase_noise_to_jitter_a_calculation_you_can_check\"><\/span>Phase noise to jitter: a calculation you can check<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>For small phase fluctuations with a consistently defined single-sideband spectrum, convert dB values to linear power before integrating:<\/p>\n<p><strong>\u03c3<sub>\u03c6<\/sub>\u00b2 = 2 \u222b<sub>fL<\/sub><sup>fH<\/sup> 10<sup>L(f)\/10<\/sup> df<\/strong>, then <strong>\u03c3<sub>t<\/sub> = \u03c3<sub>\u03c6<\/sub> \/ (2\u03c0f<sub>0<\/sub>)<\/strong>.<\/p>\n<p>The factor 2 accounts for the two sidebands under this convention. Integrating dBc\/Hz values directly, omitting the factor, or using the offset frequency in place of the carrier produces the wrong result.<\/p>\n<p><strong>Worked hypothetical example:<\/strong> let f<sub>0<\/sub> = 100 MHz, L(f) = \u2212140 dBc\/Hz throughout 10 kHz\u20131 MHz, with no discrete spurs included. The bandwidth is 990,000 Hz. The linear density is 10<sup>\u221214<\/sup>\/Hz, so phase variance is 2 \u00d7 10<sup>\u221214<\/sup> \u00d7 990,000 = 1.98 \u00d7 10<sup>\u22128<\/sup> rad\u00b2. RMS phase is 0.000140712 rad; RMS time is <strong>0.223951 ps, or approximately 224 fs<\/strong>.<\/p>\n<table style=\"width:100%;table-layout:fixed;overflow-wrap:anywhere;\">\n<tbody>\n<tr>\n<td><strong>Input or result<\/strong><\/td>\n<td><strong>Example A<\/strong><\/td>\n<td><strong>Example B<\/strong><\/td>\n<\/tr>\n<tr>\n<td>Carrier \/ offset band<\/td>\n<td>100 MHz \/ 10 kHz\u20131 MHz<\/td>\n<td>100 MHz \/ 10 kHz\u20131 MHz<\/td>\n<\/tr>\n<tr>\n<td>Assumed flat SSB density<\/td>\n<td>\u2212140 dBc\/Hz<\/td>\n<td>\u2212145 dBc\/Hz<\/td>\n<\/tr>\n<tr>\n<td>Calculated RMS time<\/td>\n<td>0.224 ps<\/td>\n<td>0.126 ps<\/td>\n<\/tr>\n<tr>\n<td>What the result covers<\/td>\n<td>Only the specified hypothetical noise band<\/td>\n<td>The same band and assumptions, allowing a fair comparison<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>B&#8217;s 5 dB lower density reduces time RMS by a factor of 10<sup>\u22125\/20<\/sup> \u2248 0.562, not by \u201c5 ps.\u201d For a real sloping spectrum, integrate the actual linear data or a justified piecewise model. Do not stretch this flat example across an unmeasured band.<\/p>\n<p>Choose fL and fH from the system requirement and transfer behavior. There is no universal \u201c10 kHz\u20131 MHz\u201d acceptance band. A tracking loop or clock input can weight noise differently; apply the appropriate transfer function when a rectangular integration window is not an adequate model.<\/p>\n<h2 style=\"text-align:left;word-break:normal;overflow-wrap:break-word;\"><span class=\"ez-toc-section\" id=\"Phase_noise_measurement_with_spectrum_analyzer_check_the_floor\"><\/span>Phase noise measurement with spectrum analyzer: check the floor<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>A direct spectrum-analyzer measurement compares nearby noise with the carrier and normalizes the result to bandwidth. Its usable range depends on dynamic range, analyzer local-oscillator noise and measurement settings. An attractive trace is not proof that those contributions are negligible.<\/p>\n<p>Check input power, attenuation, reference level, offset range and the instrument&#8217;s noise-normalization method. Use the manufacturer&#8217;s phase-noise procedure rather than subtracting an arbitrary resolution-bandwidth number from a screen marker. Amplitude noise or overload can also invalidate a phase-only interpretation.<\/p>\n<p>Here is a simplified illustration of floor contamination: independent noise powers of \u2212140 and \u2212150 dBc\/Hz sum to <strong>\u2212139.586 dBc\/Hz<\/strong>, about 0.414 dB above the first contribution. Two equal \u2212140 dBc\/Hz contributions sum to <strong>\u2212136.990 dBc\/Hz<\/strong>, about 3.010 dB higher. This is a power-addition example, not a universal correction formula for every phase-noise instrument.<\/p>\n<p>If the DUT result follows the analyzer floor, change to a validated lower-floor method or report the measurement limitation. Do not subtract almost equal traces and present the unstable difference as an accurate low-noise oscillator result.<\/p>\n<h2 style=\"text-align:left;word-break:normal;overflow-wrap:break-word;\"><span class=\"ez-toc-section\" id=\"Phase_noise_measurement_cross_correlation_what_it_removes\"><\/span>Phase noise measurement cross correlation: what it removes<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>A two-channel phase-noise system observes the same DUT through two measurement paths. Cross-correlation can reduce uncorrelated noise added by the channels while retaining the DUT&#8217;s common contribution. More processing can improve sensitivity, at the cost of measurement time.<\/p>\n<figure><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2026\/11\/project426-phase-noise-setup.jpg\" alt=\"Simplified phase-noise cross-correlation setup with one DUT split into two measurement channels\" style=\"max-width:100%;height:auto;display:block;\" width=\"1200\" height=\"800\"><figcaption>Conceptual measurement paths. Actual instrument architecture and calibration follow the instrument documentation.<\/figcaption><\/figure>\n<p>It does not remove real DUT noise. Nor does it automatically reject shared interference, common supply coupling or correlated errors. If a line remains while channel noise falls, investigate its origin rather than assuming enough averaging will erase it.<\/p>\n<p>Record the correlation or averaging configuration with the result. Comparing a long, low-floor acquisition with a quick preliminary sweep without noting the difference can make an instrument setting look like a product improvement.<\/p>\n<h2 style=\"text-align:left;word-break:normal;overflow-wrap:break-word;\"><span class=\"ez-toc-section\" id=\"Where_phase_noise_matters_applications_and_acceptance_checks\"><\/span>Where phase noise matters: applications and acceptance checks<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<h3>ADC sampling clocks<\/h3>\n<p>The clock sets sampling instants; uncertainty becomes signal error. Use the noise delivered to the actual converter clock input, with the relevant filtering and bandwidth. For a sine-wave input, the jitter-only ceiling is SNR = \u221220 log<sub>10<\/sub>(2\u03c0f<sub>signal<\/sub>\u03c3<sub>t<\/sub>).<\/p>\n<p>Using example A&#8217;s <em>band-limited clock contribution only<\/em>, a 20 MHz input gives approximately <strong>91.0 dB<\/strong>; a 100 MHz input gives approximately <strong>77.0 dB<\/strong>. These are not complete ADC SNR predictions: aperture jitter, other clock noise outside the example band, distortion and converter noise remain. Verify the delivered clock and the converter spectrum under the intended input frequency, amplitude and configuration.<\/p>\n<h3>RF receiver local oscillators<\/h3>\n<p>The LO translates signals to another frequency. Noise around it can transfer interference energy into the wanted band, so the important offsets relate to the channel and blocker arrangement. Preserve wanted-channel sensitivity; control the noise contribution around relevant blocker separations, not merely the integrated number printed on a clock brochure.<\/p>\n<p>For an illustrative blocker 1 MHz from the wanted signal, inspect the LO spectrum around the relevant 1 MHz offset and apply the receiver&#8217;s actual bandwidth and conversion behavior. A single spot value still does not establish total in-channel noise. Verify sensitivity or error performance with the specified wanted signal and blocker present, then repeat the comparison with identical receiver gain and bandwidth.<\/p>\n<h3>PLLs and clock-distribution boards<\/h3>\n<p>A PLL is not an all-purpose noise eraser. Reference-path noise and VCO noise have different transfer responses; changing loop bandwidth trades their contributions. An output buffer and the assembled clock path can add further noise.<\/p>\n<p>Compare spectra before and after the PLL or buffer at the same carrier and load, and integrate with the system&#8217;s required weighting. Then verify lock behavior, output mode and relevant timing limits. If the operating mode uses deliberate spread-spectrum modulation, treat that separately; <a href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/spread-spectrum-clocking-guide\/\">spread spectrum clocking<\/a> is not equivalent to a lower random phase-noise floor.<\/p>\n<h2 style=\"text-align:left;word-break:normal;overflow-wrap:break-word;\"><span class=\"ez-toc-section\" id=\"Reducing_phase_noise_use_a_comparison_worksheet\"><\/span>Reducing phase noise: use a comparison worksheet<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Begin with a repeatable baseline. Record output frequency, supply condition, load, temperature, measurement path, offsets, spur handling and integration settings. Change one suspected contributor at a time; otherwise a better trace does not tell you which change helped.<\/p>\n<table style=\"width:100%;table-layout:fixed;overflow-wrap:anywhere;\">\n<tbody>\n<tr>\n<td><strong>Observed evidence<\/strong><\/td>\n<td><strong>Controlled check<\/strong><\/td>\n<td><strong>Decision and next step<\/strong><\/td>\n<\/tr>\n<tr>\n<td>A narrow line appears near a switching-related offset<\/td>\n<td>Compare supply spectra and a verified alternate supply condition without changing other settings<\/td>\n<td>If both move together, investigate coupling; correlation alone is not final proof<\/td>\n<\/tr>\n<tr>\n<td>PLL output is worse in part of the band<\/td>\n<td>Compare reference, VCO model and configured loop response<\/td>\n<td>Revisit loop trade-offs; do not simply narrow bandwidth on every design<\/td>\n<\/tr>\n<tr>\n<td>Noise increases after a buffer or PCB path<\/td>\n<td>Match output format, loading and measurement reference plane before comparing<\/td>\n<td>Separate path-added noise from changed termination or analyzer settings<\/td>\n<\/tr>\n<tr>\n<td>Result sits on the instrument floor<\/td>\n<td>Check a qualified lower-floor acquisition method<\/td>\n<td>Report a limit or repeat; do not release a claimed improvement without resolution<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p><strong>Example use:<\/strong> if a line appears at a suspected supply-related offset, record its offset and relative power, compare a controlled supply change, and repeat the original condition. If the line does not reproduce, do not close the investigation with \u201cbetter decoupling fixed it.\u201d Save the spectra and conditions that support the conclusion.<\/p>\n<p>For acceptance, require the specified spot-noise mask, integrated jitter band and spur limits at the relevant clock output. A PCB fabrication pass alone cannot prove a populated oscillator circuit&#8217;s phase-noise performance. Agree the functional RF or clock test separately from bare-board acceptance.<\/p>\n<h2 style=\"text-align:left;word-break:normal;overflow-wrap:break-word;\"><span class=\"ez-toc-section\" id=\"Phase_Noise_FAQs\"><\/span>Phase Noise FAQs<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<h3>Is \u2212140 dBc\/Hz better than \u2212130 dBc\/Hz?<\/h3>\n<p>At the same carrier, offset and conditions, it is 10 dB lower noise density. It does not establish that the entire spectrum or integrated jitter is better.<\/p>\n<h3>Why does the integration bandwidth change jitter?<\/h3>\n<p>The integral counts noise within the selected band. Changing its limits changes the included power. Use the application&#8217;s required band or transfer weighting, and state it with the result.<\/p>\n<h3>Can I integrate phase noise in dB directly?<\/h3>\n<p>No. Convert L(f) to linear power density, integrate over frequency, apply the SSB convention and convert RMS phase to time using carrier frequency.<\/p>\n<h3>What RMS jitter does the example \u2212140 dBc\/Hz spectrum produce?<\/h3>\n<p>Approximately 0.224 ps for a flat spectrum from 10 kHz to 1 MHz at a 100 MHz carrier, excluding spurs. Different limits or spectrum shape give a different answer.<\/p>\n<h3>Does the ADC calculation use the clock frequency as the input frequency?<\/h3>\n<p>No. The jitter-only SNR formula uses the analog input signal frequency. The phase-to-time conversion separately uses the clock carrier frequency.<\/p>\n<h3>Should spurs be included in phase-noise-derived jitter?<\/h3>\n<p>State the requirement and the instrument&#8217;s treatment. Report discrete spurs separately in dBc and identify whether the integrated result includes them; do not silently compare different conventions.<\/p>\n<h3>Does cross-correlation remove the oscillator&#8217;s noise?<\/h3>\n<p>No. It helps reduce uncorrelated measurement-channel contributions. Noise common to the paths, including the DUT contribution, remains.<\/p>\n<h3>Can a better PCB layout guarantee lower phase noise?<\/h3>\n<p>No. Layout can affect coupling, supply integrity and clock-path behavior, but the oscillator, PLL, buffers and test setup also matter. Demonstrate improvement with matched measurements rather than a layout-only claim.<\/p>\n<h2 style=\"text-align:left;word-break:normal;overflow-wrap:break-word;\"><span class=\"ez-toc-section\" id=\"Technical_References\"><\/span>Technical References<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<ul>\n<li><a href=\"https:\/\/www.rohde-schwarz.com\/kr\/products\/test-and-measurement\/analyzers\/signal-and-spectrum-analyzers\/measuring-phase-noise_258363.html\" rel=\"nofollow\">Rohde &amp; Schwarz: measuring phase noise<\/a> \u2014 units and spectral interpretation.<\/li>\n<li><a href=\"https:\/\/www.analog.com\/media\/en\/training-seminars\/tutorials\/MT-008.pdf\" rel=\"nofollow\">Analog Devices MT-008<\/a> \u2014 phase-noise-to-jitter conversion.<\/li>\n<li><a href=\"https:\/\/www.analog.com\/media\/en\/training-seminars\/tutorials\/MT-007.pdf\" rel=\"nofollow\">Analog Devices MT-007<\/a> \u2014 aperture jitter and converter SNR.<\/li>\n<li><a href=\"https:\/\/www.sitime.com\/support\/resource-library\/application-notes\/an10062-phase-noise-measurement-guide-oscillators\" rel=\"nofollow\">SiTime AN10062<\/a> \u2014 measurement methods, cross-correlation and spurs.<\/li>\n<li><a href=\"https:\/\/www.keysight.com\/ca\/en\/assets\/3124-1845\/application-notes\/Methods-and-Instruments-for-Phase-Noise-Measurement.pdf\" rel=\"nofollow\">Keysight: methods and instruments for phase-noise measurement<\/a> \u2014 direct measurement limitations.<\/li>\n<li><a href=\"https:\/\/www.ti.com\/document-viewer\/lit\/html\/SSZTBK6\/GUID-006755A2-2486-4ADE-93CC-AD072401BECA\" rel=\"nofollow\">Texas Instruments SSZTBK6<\/a> \u2014 PLL noise contributions and loop behavior.<\/li>\n<\/ul>\n<h2 style=\"text-align:left;word-break:normal;overflow-wrap:break-word;\"><span class=\"ez-toc-section\" id=\"Custom_RF_PCB_Manufacturing_with_Prototype_and_Assembly_Support\"><\/span>Custom RF PCB Manufacturing with Prototype and Assembly Support<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Need a custom RF PCB or assembled clock board? EBest Circuit supports RF PCB fabrication, prototype builds and PCB assembly. File review connects your material and stackup requirements with the actual manufacturing and assembly scope, helping avoid a bare-board quotation that leaves the populated-board requirements unresolved.<\/p>\n<p><strong>Send your Gerber or ODB++ files, stackup, material requirements, impedance targets and quantity to <a href=\"mailto:sales@bestpcbs.com\">sales@bestpcbs.com<\/a> for a quotation.<\/strong> For PCBA, add the BOM, placement data and required functional test. Tell us which RF or clock measurements the project needs so the test scope can be evaluated explicitly\u2014without assuming that a fabrication check guarantees phase-noise performance.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Read phase noise plots, convert noise to jitter and compare clocks fairly. Check integration limits, spurs and analyzer noise before accepting a result.<\/p>\n","protected":false},"author":32827,"featured_media":39616,"comment_status":"open","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"_uf_show_specific_survey":0,"_uf_disable_surveys":false,"footnotes":""},"categories":[174],"tags":[9586,9585,413,8099],"class_list":["post-39619","post","type-post","status-publish","format-standard","hentry","category-bestpcb","tag-clock-design","tag-phase-noise","tag-rf-pcb","tag-signal-integrity"],"acf":[],"aioseo_notices":[],"aioseo_head":"\n\t\t<!-- All in One SEO 5.0.4 - aioseo.com -->\n\t<meta name=\"description\" content=\"Read phase noise plots, convert noise to jitter and compare clocks fairly. Check integration limits, spurs and analyzer noise before accepting a result.\" \/>\n\t<meta name=\"robots\" content=\"max-image-preview:large\" \/>\n\t<meta name=\"author\" content=\"mingling, gong\"\/>\n\t<link rel=\"canonical\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/phase-noise-guide\/\" \/>\n\t\t<meta name=\"generator\" content=\"All in One SEO (AIOSEO) 5.0.4\" \/>\n\t\t<meta property=\"og:locale\" content=\"en_US\" \/>\n\t\t<meta property=\"og:site_name\" content=\"PCB &amp; MCPCB - EBest PCB - More Technical Details &amp; News on PCB, MCPCB &amp; Ceramic PCB from EBest PCB\" \/>\n\t\t<meta property=\"og:type\" content=\"article\" \/>\n\t\t<meta property=\"og:title\" content=\"Phase Noise Guide: Read, Measure and Compare Clocks - PCB &amp; MCPCB - EBest PCB\" \/>\n\t\t<meta property=\"og:description\" content=\"Read phase noise plots, convert noise to jitter and compare clocks fairly. Check integration limits, spurs and analyzer noise before accepting a result.\" \/>\n\t\t<meta property=\"og:url\" content=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/phase-noise-guide\/\" \/>\n\t\t<meta property=\"og:image\" content=\"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2025\/08\/logo.png\" \/>\n\t\t<meta property=\"og:image:secure_url\" content=\"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2025\/08\/logo.png\" \/>\n\t\t<meta property=\"article:published_time\" content=\"2026-11-21T03:08:19+00:00\" \/>\n\t\t<meta property=\"article:modified_time\" content=\"2026-11-21T03:08:19+00:00\" \/>\n\t\t<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/Bestpcbs1\" \/>\n\t\t<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n\t\t<meta name=\"twitter:site\" content=\"@bestpcbs\" \/>\n\t\t<meta name=\"twitter:title\" content=\"Phase Noise Guide: Read, Measure and Compare Clocks - PCB &amp; MCPCB - EBest PCB\" \/>\n\t\t<meta name=\"twitter:description\" content=\"Read phase noise plots, convert noise to jitter and compare clocks fairly. Check integration limits, spurs and analyzer noise before accepting a result.\" \/>\n\t\t<meta name=\"twitter:creator\" content=\"@bestpcbs\" \/>\n\t\t<meta name=\"twitter:image\" content=\"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2016\/02\/logo.gif\" \/>\n\t\t<script type=\"application\/ld+json\" class=\"aioseo-schema\">\n\t\t\t{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"BlogPosting\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/phase-noise-guide\\\/#blogposting\",\"name\":\"Phase Noise Guide: Read, Measure and Compare Clocks - PCB & MCPCB - EBest PCB\",\"headline\":\"Phase Noise Guide: Read, Measure and Compare Clocks\",\"author\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/author\\\/gong588\\\/#author\"},\"publisher\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/#organization\"},\"image\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/project426-phase-noise-hero.jpg\",\"width\":1200,\"height\":800,\"caption\":\"Phase Noise title above a generic oscillator PCB and measurement equipment\"},\"datePublished\":\"2026-11-21T11:08:19+08:00\",\"dateModified\":\"2026-11-21T11:08:19+08:00\",\"inLanguage\":\"en-US\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/phase-noise-guide\\\/#webpage\"},\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/phase-noise-guide\\\/#webpage\"},\"articleSection\":\"bestpcb, Clock Design, Phase Noise, RF PCB, Signal Integrity\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/phase-noise-guide\\\/#breadcrumblist\",\"itemListElement\":[{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/#listItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/category\\\/bestpcb\\\/#listItem\",\"name\":\"bestpcb\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/category\\\/bestpcb\\\/#listItem\",\"position\":2,\"name\":\"bestpcb\",\"item\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/category\\\/bestpcb\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/phase-noise-guide\\\/#listItem\",\"name\":\"Phase Noise Guide: Read, Measure and Compare Clocks\"},\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/#listItem\",\"name\":\"Home\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/phase-noise-guide\\\/#listItem\",\"position\":3,\"name\":\"Phase Noise Guide: Read, Measure and Compare Clocks\",\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/category\\\/bestpcb\\\/#listItem\",\"name\":\"bestpcb\"}}]},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/#organization\",\"name\":\"PCB & MCPCB - Best Technology\",\"description\":\"More Technical Details & News on PCB, MCPCB & Ceramic PCB from EBest PCB\",\"url\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/\",\"telephone\":\"+8675529091601\",\"logo\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/wp-content\\\/uploads\\\/2025\\\/08\\\/logo.png\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/phase-noise-guide\\\/#organizationLogo\"},\"image\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/phase-noise-guide\\\/#organizationLogo\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/Bestpcbs1\",\"https:\\\/\\\/twitter.com\\\/bestpcbs\",\"https:\\\/\\\/www.youtube.com\\\/channel\\\/UCJsTR02i6mtLFnBBNC_i4bQ\\\/featured\",\"https:\\\/\\\/www.linkedin.com\\\/company\\\/best-pcb-technology\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/author\\\/gong588\\\/#author\",\"url\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/author\\\/gong588\\\/\",\"name\":\"mingling, gong\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/phase-noise-guide\\\/#authorImage\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/37717913504b7ea1df97ec73d58a7bcc?s=96&d=mm&r=g\",\"width\":96,\"height\":96,\"caption\":\"mingling, gong\"}},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/phase-noise-guide\\\/#webpage\",\"url\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/phase-noise-guide\\\/\",\"name\":\"Phase Noise Guide: Read, Measure and Compare Clocks - PCB & MCPCB - EBest PCB\",\"description\":\"Read phase noise plots, convert noise to jitter and compare clocks fairly. Check integration limits, spurs and analyzer noise before accepting a result.\",\"inLanguage\":\"en-US\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/#website\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/phase-noise-guide\\\/#breadcrumblist\"},\"author\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/author\\\/gong588\\\/#author\"},\"creator\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/author\\\/gong588\\\/#author\"},\"image\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/project426-phase-noise-hero.jpg\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/phase-noise-guide\\\/#mainImage\",\"width\":1200,\"height\":800,\"caption\":\"Phase Noise title above a generic oscillator PCB and measurement equipment\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/phase-noise-guide\\\/#mainImage\"},\"datePublished\":\"2026-11-21T11:08:19+08:00\",\"dateModified\":\"2026-11-21T11:08:19+08:00\"},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/#website\",\"url\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/\",\"name\":\"PCB & MCPCB - Best Technology\",\"description\":\"More Technical Details & News on PCB, MCPCB & Ceramic PCB from EBest PCB\",\"inLanguage\":\"en-US\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/#organization\"}}]}\n\t\t<\/script>\n\t\t<!-- All in One SEO -->\n\n","aioseo_head_json":{"title":"Phase Noise Guide: Read, Measure and Compare Clocks - PCB & MCPCB - EBest PCB","description":"Read phase noise plots, convert noise to jitter and compare clocks fairly. Check integration limits, spurs and analyzer noise before accepting a result.","canonical_url":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/phase-noise-guide\/","robots":"max-image-preview:large","keywords":"","webmasterTools":{"miscellaneous":""},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"BlogPosting","@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/phase-noise-guide\/#blogposting","name":"Phase Noise Guide: Read, Measure and Compare Clocks - PCB & MCPCB - EBest PCB","headline":"Phase Noise Guide: Read, Measure and Compare Clocks","author":{"@id":"https:\/\/www.bestpcbs.com\/blog\/author\/gong588\/#author"},"publisher":{"@id":"https:\/\/www.bestpcbs.com\/blog\/#organization"},"image":{"@type":"ImageObject","url":"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2026\/11\/project426-phase-noise-hero.jpg","width":1200,"height":800,"caption":"Phase Noise title above a generic oscillator PCB and measurement equipment"},"datePublished":"2026-11-21T11:08:19+08:00","dateModified":"2026-11-21T11:08:19+08:00","inLanguage":"en-US","mainEntityOfPage":{"@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/phase-noise-guide\/#webpage"},"isPartOf":{"@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/phase-noise-guide\/#webpage"},"articleSection":"bestpcb, Clock Design, Phase Noise, RF PCB, Signal Integrity"},{"@type":"BreadcrumbList","@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/phase-noise-guide\/#breadcrumblist","itemListElement":[{"@type":"ListItem","@id":"https:\/\/www.bestpcbs.com\/blog\/#listItem","position":1,"name":"Home","item":"https:\/\/www.bestpcbs.com\/blog\/","nextItem":{"@type":"ListItem","@id":"https:\/\/www.bestpcbs.com\/blog\/category\/bestpcb\/#listItem","name":"bestpcb"}},{"@type":"ListItem","@id":"https:\/\/www.bestpcbs.com\/blog\/category\/bestpcb\/#listItem","position":2,"name":"bestpcb","item":"https:\/\/www.bestpcbs.com\/blog\/category\/bestpcb\/","nextItem":{"@type":"ListItem","@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/phase-noise-guide\/#listItem","name":"Phase Noise Guide: Read, Measure and Compare Clocks"},"previousItem":{"@type":"ListItem","@id":"https:\/\/www.bestpcbs.com\/blog\/#listItem","name":"Home"}},{"@type":"ListItem","@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/phase-noise-guide\/#listItem","position":3,"name":"Phase Noise Guide: Read, Measure and Compare Clocks","previousItem":{"@type":"ListItem","@id":"https:\/\/www.bestpcbs.com\/blog\/category\/bestpcb\/#listItem","name":"bestpcb"}}]},{"@type":"Organization","@id":"https:\/\/www.bestpcbs.com\/blog\/#organization","name":"PCB & MCPCB - Best Technology","description":"More Technical Details & News on PCB, MCPCB & Ceramic PCB from EBest PCB","url":"https:\/\/www.bestpcbs.com\/blog\/","telephone":"+8675529091601","logo":{"@type":"ImageObject","url":"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2025\/08\/logo.png","@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/phase-noise-guide\/#organizationLogo"},"image":{"@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/phase-noise-guide\/#organizationLogo"},"sameAs":["https:\/\/www.facebook.com\/Bestpcbs1","https:\/\/twitter.com\/bestpcbs","https:\/\/www.youtube.com\/channel\/UCJsTR02i6mtLFnBBNC_i4bQ\/featured","https:\/\/www.linkedin.com\/company\/best-pcb-technology"]},{"@type":"Person","@id":"https:\/\/www.bestpcbs.com\/blog\/author\/gong588\/#author","url":"https:\/\/www.bestpcbs.com\/blog\/author\/gong588\/","name":"mingling, gong","image":{"@type":"ImageObject","@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/phase-noise-guide\/#authorImage","url":"https:\/\/secure.gravatar.com\/avatar\/37717913504b7ea1df97ec73d58a7bcc?s=96&d=mm&r=g","width":96,"height":96,"caption":"mingling, gong"}},{"@type":"WebPage","@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/phase-noise-guide\/#webpage","url":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/phase-noise-guide\/","name":"Phase Noise Guide: Read, Measure and Compare Clocks - PCB & MCPCB - EBest PCB","description":"Read phase noise plots, convert noise to jitter and compare clocks fairly. Check integration limits, spurs and analyzer noise before accepting a result.","inLanguage":"en-US","isPartOf":{"@id":"https:\/\/www.bestpcbs.com\/blog\/#website"},"breadcrumb":{"@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/phase-noise-guide\/#breadcrumblist"},"author":{"@id":"https:\/\/www.bestpcbs.com\/blog\/author\/gong588\/#author"},"creator":{"@id":"https:\/\/www.bestpcbs.com\/blog\/author\/gong588\/#author"},"image":{"@type":"ImageObject","url":"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2026\/11\/project426-phase-noise-hero.jpg","@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/phase-noise-guide\/#mainImage","width":1200,"height":800,"caption":"Phase Noise title above a generic oscillator PCB and measurement equipment"},"primaryImageOfPage":{"@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/phase-noise-guide\/#mainImage"},"datePublished":"2026-11-21T11:08:19+08:00","dateModified":"2026-11-21T11:08:19+08:00"},{"@type":"WebSite","@id":"https:\/\/www.bestpcbs.com\/blog\/#website","url":"https:\/\/www.bestpcbs.com\/blog\/","name":"PCB & MCPCB - Best Technology","description":"More Technical Details & News on PCB, MCPCB & Ceramic PCB from EBest PCB","inLanguage":"en-US","publisher":{"@id":"https:\/\/www.bestpcbs.com\/blog\/#organization"}}]},"og:locale":"en_US","og:site_name":"PCB &amp; MCPCB - EBest PCB - More Technical Details &amp; News on PCB, MCPCB &amp; Ceramic PCB from EBest PCB","og:type":"article","og:title":"Phase Noise Guide: Read, Measure and Compare Clocks - PCB &amp; MCPCB - EBest PCB","og:description":"Read phase noise plots, convert noise to jitter and compare clocks fairly. Check integration limits, spurs and analyzer noise before accepting a result.","og:url":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/phase-noise-guide\/","og:image":"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2025\/08\/logo.png","og:image:secure_url":"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2025\/08\/logo.png","article:published_time":"2026-11-21T03:08:19+00:00","article:modified_time":"2026-11-21T03:08:19+00:00","article:publisher":"https:\/\/www.facebook.com\/Bestpcbs1","twitter:card":"summary_large_image","twitter:site":"@bestpcbs","twitter:title":"Phase Noise Guide: Read, Measure and Compare Clocks - PCB &amp; MCPCB - EBest PCB","twitter:description":"Read phase noise plots, convert noise to jitter and compare clocks fairly. Check integration limits, spurs and analyzer noise before accepting a result.","twitter:creator":"@bestpcbs","twitter:image":"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2016\/02\/logo.gif"},"aioseo_meta_data":{"post_id":"39619","title":null,"description":null,"keywords":null,"keyphrases":null,"primary_term":null,"canonical_url":null,"og_title":null,"og_description":null,"og_object_type":"default","og_image_type":"default","og_image_url":null,"og_image_width":null,"og_image_height":null,"og_image_custom_url":null,"og_image_custom_fields":null,"og_video":null,"og_custom_url":null,"og_article_section":null,"og_article_tags":null,"twitter_use_og":false,"twitter_card":"default","twitter_image_type":"default","twitter_image_url":null,"twitter_image_custom_url":null,"twitter_image_custom_fields":null,"twitter_title":null,"twitter_description":null,"schema":{"blockGraphs":[],"customGraphs":[],"default":{"data":{"Article":[],"Course":[],"Dataset":[],"FAQPage":[],"Movie":[],"Person":[],"Product":[],"ProductReview":[],"Car":[],"Recipe":[],"Service":[],"SoftwareApplication":[],"WebPage":[]},"graphName":"BlogPosting","isEnabled":true},"graphs":[]},"schema_type":"default","schema_type_options":null,"pillar_content":false,"robots_default":true,"robots_noindex":false,"robots_noarchive":false,"robots_nosnippet":false,"robots_nofollow":false,"robots_noimageindex":false,"robots_noodp":false,"robots_notranslate":false,"robots_max_snippet":null,"robots_max_videopreview":null,"robots_max_imagepreview":"large","priority":null,"frequency":null,"local_seo":null,"breadcrumb_settings":null,"limit_modified_date":false,"ai":null,"created":"2026-11-21 03:07:56","updated":"2026-11-21 04:07:56","seo_analyzer_scan_date":null,"focus_keyword":null,"additional_keywords":null,"truseo_locale":null},"aioseo_breadcrumb":"<div class=\"aioseo-breadcrumbs\"><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/www.bestpcbs.com\/blog\/\" title=\"Home\">Home<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">\u00bb<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/www.bestpcbs.com\/blog\/category\/bestpcb\/\" title=\"bestpcb\">bestpcb<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">\u00bb<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\tPhase Noise Guide: Read, Measure and Compare Clocks\n\t\t<\/span><\/div>","aioseo_breadcrumb_json":[{"label":"Home","link":"https:\/\/www.bestpcbs.com\/blog\/"},{"label":"bestpcb","link":"https:\/\/www.bestpcbs.com\/blog\/category\/bestpcb\/"},{"label":"Phase Noise Guide: Read, Measure and Compare Clocks","link":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/phase-noise-guide\/"}],"_links":{"self":[{"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/posts\/39619","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/users\/32827"}],"replies":[{"embeddable":true,"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/comments?post=39619"}],"version-history":[{"count":1,"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/posts\/39619\/revisions"}],"predecessor-version":[{"id":39620,"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/posts\/39619\/revisions\/39620"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/media\/39616"}],"wp:attachment":[{"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/media?parent=39619"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/categories?post=39619"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/tags?post=39619"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}