


{"id":39213,"date":"2026-11-17T01:09:26","date_gmt":"2026-11-16T17:09:26","guid":{"rendered":"https:\/\/www.bestpcbs.com\/blog\/?p=39213"},"modified":"2026-11-17T01:11:13","modified_gmt":"2026-11-16T17:11:13","slug":"vna-isolation-calibration","status":"publish","type":"post","link":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-isolation-calibration\/","title":{"rendered":"VNA Isolation Calibration: Measure the DUT, Not Port Leakage"},"content":{"rendered":"<div id=\"ez-toc-container\" class=\"ez-toc-v2_0_89 ez-toc-wrap-left counter-hierarchy ez-toc-counter ez-toc-grey ez-toc-container-direction\">\n<div class=\"ez-toc-title-container\">\n<p class=\"ez-toc-title\" style=\"cursor:inherit\">Table of Contents<\/p>\n<span class=\"ez-toc-title-toggle\"><a href=\"#\" class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" aria-label=\"Toggle Table of Content\"><span class=\"ez-toc-js-icon-con\"><span class=\"\"><span class=\"eztoc-hide\" style=\"display:none;\">Toggle<\/span><span class=\"ez-toc-icon-toggle-span\"><svg style=\"fill: #999;color:#999\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" class=\"list-377408\" width=\"20px\" height=\"20px\" viewBox=\"0 0 24 24\" fill=\"none\"><path d=\"M6 6H4v2h2V6zm14 0H8v2h12V6zM4 11h2v2H4v-2zm16 0H8v2h12v-2zM4 16h2v2H4v-2zm16 0H8v2h12v-2z\" fill=\"currentColor\"><\/path><\/svg><svg style=\"fill: #999;color:#999\" class=\"arrow-unsorted-368013\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" width=\"10px\" height=\"10px\" viewBox=\"0 0 24 24\" version=\"1.2\" baseProfile=\"tiny\"><path d=\"M18.2 9.3l-6.2-6.3-6.2 6.3c-.2.2-.3.4-.3.7s.1.5.3.7c.2.2.4.3.7.3h11c.3 0 .5-.1.7-.3.2-.2.3-.5.3-.7s-.1-.5-.3-.7zM5.8 14.7l6.2 6.3 6.2-6.3c.2-.2.3-.5.3-.7s-.1-.5-.3-.7c-.2-.2-.4-.3-.7-.3h-11c-.3 0-.5.1-.7.3-.2.2-.3.5-.3.7s.1.5.3.7z\"\/><\/svg><\/span><\/span><\/span><\/a><\/span><\/div>\n<nav><ul class='ez-toc-list ez-toc-list-level-1 ' ><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-isolation-calibration\/#VNA_Isolation_Calibration_What_the_Optional_Step_Removes\" >VNA Isolation Calibration: What the Optional Step Removes<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-isolation-calibration\/#VNA_Crosstalk_Measurement_Separate_Three_Leakage_Paths\" >VNA Crosstalk Measurement: Separate Three Leakage Paths<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-isolation-calibration\/#VNA_Calibration_Procedure_Terminate_Both_Test_Ports\" >VNA Calibration Procedure: Terminate Both Test Ports<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-4\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-isolation-calibration\/#VNA_Noise_Floor_Decide_Whether_Isolation_Correction_Helps\" >VNA Noise Floor: Decide Whether Isolation Correction Helps<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-5\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-isolation-calibration\/#S21_Measurement_Convert_Leakage_Separation_to_an_Error_Bound\" >S21 Measurement: Convert Leakage Separation to an Error Bound<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-6\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-isolation-calibration\/#VNA_Calibration_Standards_Verify_With_an_Attenuator_You_Did_Not_Fit\" >VNA Calibration Standards: Verify With an Attenuator You Did Not Fit<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-7\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-isolation-calibration\/#RF_Isolation_Measurement_Apply_the_Check_to_Three_PCB_Tasks\" >RF Isolation Measurement: Apply the Check to Three PCB Tasks<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-8\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-isolation-calibration\/#VNA_Dynamic_Range_Decide_What_the_Report_Can_Claim\" >VNA Dynamic Range: Decide What the Report Can Claim<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-9\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-isolation-calibration\/#VNA_Isolation_Calibration_FAQs\" >VNA Isolation Calibration FAQs<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-10\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-isolation-calibration\/#Technical_References\" >Technical References<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-11\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-isolation-calibration\/#Custom_RF_PCBs_With_Stackup_and_Test_Coupon_Review\" >Custom RF PCBs With Stackup and Test Coupon Review<\/a><\/li><\/ul><\/nav><\/div>\n<div class=\"yzp-no-index\"><\/div><p><strong>Use VNA isolation calibration only when a stable leakage path is large enough to affect the result and the correction improves an independent check.<\/strong> The optional step measures transmission with the two test ports terminated separately. It can reduce stable additive leakage in the calibration model. It cannot recover a signal buried in random noise or separate physical PCB crosstalk from the PCB you intend to measure.<\/p>\n<p>Start with each port on its own matched load. Save the complex trace, then verify the result with a known attenuator in the range you intend to claim. If the corrected trace looks deeper but a check standard disagrees, do not use the nicer-looking stopband.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"VNA_Isolation_Calibration_What_the_Optional_Step_Removes\"><\/span>VNA Isolation Calibration: What the Optional Step Removes<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>There should be no intentional transmission path between independently terminated ports. A repeatable response can still appear because part of the source signal reaches the receive path. On a VNA that implements an isolation term, that leakage becomes an additive error estimate. A two-port calibration can have separate forward and reverse isolation estimates.<\/p>\n<figure><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2026\/11\/vna-isolation-calibration.jpg\" width=\"1200\" height=\"600\" style=\"display:block;max-width:100%;height:auto\" alt=\"Two separate coaxial test cables, each capped with its own RF termination\"><figcaption>RF connection illustration. The loads are separate terminations at the calibration planes, not a through connection.<\/figcaption><\/figure>\n<p>Thinking in complex numbers explains the limit. If M is the measured response, D the wanted response, and L an additive leakage term, the simplified model is M \u2248 D + L. The correction estimates and removes a vector, not a number of decibels. This picture isolates one error mechanism; it is not the complete two-port error model.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"VNA_Crosstalk_Measurement_Separate_Three_Leakage_Paths\"><\/span>VNA Crosstalk Measurement: Separate Three Leakage Paths<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>First decide where the unwanted signal travels. Measure with the cable ends separately terminated, then compare a fixture isolation witness with the intended launches, cable routing, switch states and unused ports. A witness can be an intentionally isolated coupon designed to preserve the fixture geometry. Its result characterizes that witness; it does not automatically equal the leakage when a real PCB is installed.<\/p>\n<figure><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2026\/11\/vna-isolation-paths.jpg\" width=\"1200\" height=\"600\" style=\"display:block;max-width:100%;height:auto\" alt=\"Diagram comparing terminated cable ends, a fixture isolation witness and the real PCB path\"><figcaption>These are three different measurement boundaries. Do not use a trace taken at one boundary to subtract everything at another.<\/figcaption><\/figure>\n<figure class=\"wp-block-table\" style=\"max-width:100%;overflow-x:auto\">\n<table style=\"table-layout:fixed;width:100%\">\n<thead>\n<tr>\n<th scope=\"col\" style=\"white-space:normal;overflow-wrap:anywhere\">Path<\/th>\n<th scope=\"col\" style=\"white-space:normal;overflow-wrap:anywhere\">Check<\/th>\n<th scope=\"col\" style=\"white-space:normal;overflow-wrap:anywhere\">Action<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<th scope=\"row\" style=\"white-space:normal;overflow-wrap:anywhere\">Analyzer and cables<\/th>\n<td style=\"white-space:normal;overflow-wrap:anywhere\">Two independent loads.<\/td>\n<td style=\"white-space:normal;overflow-wrap:anywhere\">Try isolation correction if the residual is stable.<\/td>\n<\/tr>\n<tr>\n<th scope=\"row\" style=\"white-space:normal;overflow-wrap:anywhere\">Fixture or switch path<\/th>\n<td style=\"white-space:normal;overflow-wrap:anywhere\">Matched isolated witness.<\/td>\n<td style=\"white-space:normal;overflow-wrap:anywhere\">Fix or validate the fixture separately.<\/td>\n<\/tr>\n<tr>\n<th scope=\"row\" style=\"white-space:normal;overflow-wrap:anywhere\">PCB coupling<\/th>\n<td style=\"white-space:normal;overflow-wrap:anywhere\">Actual board and required terminations.<\/td>\n<td style=\"white-space:normal;overflow-wrap:anywhere\">Keep it if this coupling is the thing being measured.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/figure>\n<h2><span class=\"ez-toc-section\" id=\"VNA_Calibration_Procedure_Terminate_Both_Test_Ports\"><\/span>VNA Calibration Procedure: Terminate Both Test Ports<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<ol>\n<li><strong>Define the planes and conditions.<\/strong> Record the port map, frequency grid, source power, receiver settings and reference impedance. Use 50 \u03a9 loads only for a setup whose calibration and test plan call for them.<\/li>\n<li><strong>Follow the instrument&#8217;s calibration sequence.<\/strong> At the isolation prompt, put a separate matched load on each indicated test port. Do not use an open cable, a thru, or the DUT in place of an isolation standard.<\/li>\n<li><strong>Acquire a clean estimate.<\/strong> Use the approved IF bandwidth or averaging setting for the calibration. Hold cable positions and switch states stable. Save the calibration and record whether both directions were acquired.<\/li>\n<li><strong>Keep a comparison calibration.<\/strong> Where the instrument supports it, compare equivalent calibrations with and without the isolation term. Do not deliberately change receiver range or source power at the same time; it defeats the comparison.<\/li>\n<\/ol>\n<h2><span class=\"ez-toc-section\" id=\"VNA_Noise_Floor_Decide_Whether_Isolation_Correction_Helps\"><\/span>VNA Noise Floor: Decide Whether Isolation Correction Helps<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Repeat the terminated sweep and look at complex consistency. If a response is repeatable at the same frequencies and keeps phase across sweeps, a stable term may be present. If the response varies strongly in phase and magnitude near the floor, subtracting a noisy estimate can add error. A lower displayed trace after calibration is not by itself a reason to keep the term.<\/p>\n<p>Use the <a href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-if-bandwidth\/\">VNA IF bandwidth guide<\/a> when the problem may be random noise and sweep time rather than a stable leakage term. Verify a new calibration if instrument settings or the physical setup change. Never assume that a narrower bandwidth removes coherent leakage.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"S21_Measurement_Convert_Leakage_Separation_to_an_Error_Bound\"><\/span>S21 Measurement: Convert Leakage Separation to an Error Bound<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p><strong>A leakage residual 20 dB below the wanted signal can still shift its reading by about \u22120.92 to +0.83 dB.<\/strong> For a calculated example at one frequency, assume S21 for the DUT is \u221280 dB and the remaining leakage bound is \u2212100 dB at the same plane and normalization. The residual-to-wanted amplitude ratio is 10<sup>\u221220\/20<\/sup> = 0.100.<\/p>\n<p>For a coherent residual with unknown phase, the extreme magnitudes are 0.900\u00d7 and 1.100\u00d7 the wanted amplitude. Convert those ratios with <code>20 log10<\/code>. If you allocate no more than \u00b10.5 dB to this one error source, the more conservative cancellation case requires a ratio no greater than <code>1 \u2212 10<sup>\u22120.5\/20<\/sup><\/code>, or about 0.0559. That corresponds to 25.1 dB separation when rounded conservatively. Neither figure includes random noise, calibration-match error or repeatability.<\/p>\n<figure><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2026\/11\/vna-isolation-vector-error.jpg\" width=\"1200\" height=\"600\" style=\"display:block;max-width:100%;height:auto\" alt=\"Calculated amplitude bounds for a coherent residual 20 decibels below the wanted transmission: from minus 0.92 to plus 0.83 decibels\"><figcaption>Calculated worst-phase limits for one additive residual term. The diagram does not represent measured VNA performance.<\/figcaption><\/figure>\n<p>Use a justified upper bound on residual leakage, not the easiest single terminated sample. If you do not know the wanted amplitude independently, work from the product limit as a design target for the measurement or use the verified complex error bound and the applicable decision rule. Do not label the example separation as a full uncertainty budget.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"VNA_Calibration_Standards_Verify_With_an_Attenuator_You_Did_Not_Fit\"><\/span>VNA Calibration Standards: Verify With an Attenuator You Did Not Fit<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Choose a characterized attenuator whose attenuation, reference plane, frequency range and uncertainty are appropriate to the decision. Measure it in both directions if both are in scope. Compare the result using each candidate calibration, with the same cables, band and test settings. Reconnect once or more under the approved repeatability procedure to see whether the claimed improvement survives re-mating.<\/p>\n<p>A thru can verify basic tracking, but it cannot establish deep-attenuation accuracy. A low-loss reference is not a substitute for verification near \u221280 dB if that is what you intend to report. Do not assume a chain of nominal pads has the precise sum of its labels across the band. If the verification does not cover the required level, improve the setup or report the unverified band explicitly.<\/p>\n<p>After both directions have enough verified margin, use the <a href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s21-vs-s12\/\">S21 vs. S12 guide<\/a> to compare their complex responses. Do not interpret a direction-to-direction difference below the validated floor as nonreciprocal PCB behavior.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"RF_Isolation_Measurement_Apply_the_Check_to_Three_PCB_Tasks\"><\/span>RF Isolation Measurement: Apply the Check to Three PCB Tasks<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<h3>Filter stopband<\/h3>\n<p>Keep the filter and any shielding that belongs to the product in the measurement path. Compare the isolated fixture witness and attenuator before the sweep. Release only the frequencies at which the verified leakage and noise allowance supports the specified stopband limit; do not call the display floor the filter response.<\/p>\n<h3>Coupling between RF traces<\/h3>\n<p>Drive the defined aggressor and measure the victim at the specified end, with the other ports in their required terminations. Compare a fixture witness using the same cables and orientation. Do not subtract the coupling between PCB traces you came to measure, or report a matched-port result as a guarantee for an unmatched deployed load.<\/p>\n<h3>RF switch off-state<\/h3>\n<p>Keep the intended off-state, bias and unused-port terminations. Characterize or eliminate leakage around the fixture and through the switch matrix used for measurement. Verify representative off-state attenuation and repeat the state transition at the approved power; do not assume an open bench condition verifies off-state isolation.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"VNA_Dynamic_Range_Decide_What_the_Report_Can_Claim\"><\/span>VNA Dynamic Range: Decide What the Report Can Claim<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Use the worksheet for the weakest relevant part of the band. Include both port directions when required and record the path used to establish the leakage bound. Document the product limit and chosen guard band separately from the calibration steps.<\/p>\n<figure class=\"wp-block-table\" style=\"max-width:100%;overflow-x:auto\">\n<table style=\"table-layout:fixed;width:100%\">\n<thead>\n<tr>\n<th scope=\"col\" style=\"white-space:normal;overflow-wrap:anywhere\">Check<\/th>\n<th scope=\"col\" style=\"white-space:normal;overflow-wrap:anywhere\">Example<\/th>\n<th scope=\"col\" style=\"white-space:normal;overflow-wrap:anywhere\">Decision<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<th scope=\"row\" style=\"white-space:normal;overflow-wrap:anywhere\">Leakage allowance<\/th>\n<td style=\"white-space:normal;overflow-wrap:anywhere\">\u221280 dB wanted, \u2212100 dB residual bound.<\/td>\n<td style=\"white-space:normal;overflow-wrap:anywhere\">20 dB gap is insufficient for the example \u00b10.5 dB allowance.<\/td>\n<\/tr>\n<tr>\n<th scope=\"row\" style=\"white-space:normal;overflow-wrap:anywhere\">Independent reference<\/th>\n<td style=\"white-space:normal;overflow-wrap:anywhere\">Enter known attenuation, band and uncertainty.<\/td>\n<td style=\"white-space:normal;overflow-wrap:anywhere\">Verify both directions required by the test plan.<\/td>\n<\/tr>\n<tr>\n<th scope=\"row\" style=\"white-space:normal;overflow-wrap:anywhere\">Reporting limit<\/th>\n<td style=\"white-space:normal;overflow-wrap:anywhere\">Save settings, witness, repeats and unsupported band.<\/td>\n<td style=\"white-space:normal;overflow-wrap:anywhere\">Report unresolved points as inconclusive, not a precise pass.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/figure>\n<p>For RF PCB test acceptance, use the drawing, contract and qualified test plan for limits and uncertainty. There is no universal PCB isolation-calibration separation to substitute for them. If you cannot distinguish the DUT from the setup, retain the raw and corrected data and state exactly what remains unproven.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"VNA_Isolation_Calibration_FAQs\"><\/span>VNA Isolation Calibration FAQs<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<h3>Do I need two matched loads?<\/h3>\n<p>Use the termination procedure for your model. The conventional two-port isolation step described here uses separate matched loads at the indicated planes.<\/p>\n<h3>Can I skip isolation calibration?<\/h3>\n<p>Yes if your method allows it and independent verification shows that residual leakage and uncertainty meet the measurement need.<\/p>\n<h3>Is S21 in dB the same as a positive isolation number?<\/h3>\n<p>Not in sign: for the same transmission path, S21 of \u221280 dB is often described as 80 dB of isolation. Record both the path and sign convention.<\/p>\n<h3>Why did my trace become noisier after calibration?<\/h3>\n<p>The correction can include noise from its estimate. Repeat at documented settings, check an independent reference and compare a calibration without isolation.<\/p>\n<h3>Can I subtract the terminated plot in dB?<\/h3>\n<p>No. Coherent leakage adds as a complex amplitude and may reinforce or cancel the wanted signal.<\/p>\n<h3>Can I use the same correction after moving a cable?<\/h3>\n<p>Only if your procedure verifies it still applies. Movement can alter both transmission tracking and leakage.<\/p>\n<h3>Will an isolation correction remove fixture crosstalk?<\/h3>\n<p>Not generally. Leakage that changes with the installed DUT or setup is not a stable matched-load term. Verify the actual fixture separately.<\/p>\n<h3>How much separation should I require?<\/h3>\n<p>Derive it from the allowed error and the verified type of residual, then include the other uncertainty sources. Do not treat the example as a specification.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"Technical_References\"><\/span>Technical References<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<ul>\n<li><a href=\"https:\/\/helpfiles.keysight.com\/csg\/pxivna\/S3_Cals\/Accurate.htm\" rel=\"nofollow\">Keysight PXIe VNA: Accurate Calibrations<\/a> \u2014 optional isolation, matched loads and near-floor limitations.<\/li>\n<li><a href=\"https:\/\/helpfiles.keysight.com\/csg\/pxivna\/S2_Opt\/Crosstalk.htm\" rel=\"nofollow\">Keysight PXIe VNA: Crosstalk<\/a> \u2014 acquisition of leakage and noise reduction.<\/li>\n<li><a href=\"https:\/\/helpfiles.keysight.com\/csg\/pxivna\/S3_Cals\/calibration_standards.htm\" rel=\"nofollow\">Keysight: Calibration Standards<\/a> \u2014 forward and reverse transmission error classes.<\/li>\n<li><a href=\"https:\/\/siglentna.com\/wp-content\/uploads\/2023\/04\/RF-measurments-using-VNA-Rev-8.pdf\" rel=\"nofollow\">Siglent: Calibration and RF Measurements Using VNA, Rev. 8<\/a> \u2014 calibration and RF test setup.<\/li>\n<\/ul>\n<h2><span class=\"ez-toc-section\" id=\"Custom_RF_PCBs_With_Stackup_and_Test_Coupon_Review\"><\/span>Custom RF PCBs With Stackup and Test Coupon Review<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Planning a filter, switch or multi-channel RF PCB? Send EBest Circuit your stackup, Gerbers or ODB++, launch parts, frequency band and the locations of the isolation checks. Reviewing the launch and coupon geometry before fabrication helps make board results and fixture results comparable.<\/p>\n<p><strong><a href=\"mailto:sales@bestpcbs.com\">Request an RF PCB fabrication quote<\/a><\/strong> with your quantity, required date and acceptance plan.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Know when to use VNA isolation calibration. Terminate both ports, verify with an independent attenuator, and bound leakage error in RF PCB tests.<\/p>\n","protected":false},"author":32827,"featured_media":39212,"comment_status":"open","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"_uf_show_specific_survey":0,"_uf_disable_surveys":false,"footnotes":""},"categories":[174],"tags":[9482,9452,9481,9480],"class_list":["post-39213","post","type-post","status-publish","format-standard","hentry","category-bestpcb","tag-rf-isolation-measurement","tag-vna-calibration","tag-vna-crosstalk","tag-vna-isolation-calibration"],"acf":[],"aioseo_notices":[],"aioseo_head":"\n\t\t<!-- All in One SEO 5.0.4 - aioseo.com -->\n\t<meta name=\"description\" content=\"Know when to use VNA isolation calibration. Terminate both ports, verify with an independent attenuator, and bound leakage error in RF PCB tests.\" \/>\n\t<meta name=\"robots\" content=\"max-image-preview:large\" \/>\n\t<meta name=\"author\" content=\"mingling, gong\"\/>\n\t<link rel=\"canonical\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-isolation-calibration\/\" \/>\n\t\t<meta name=\"generator\" content=\"All in One SEO (AIOSEO) 5.0.4\" \/>\n\t\t<meta property=\"og:locale\" content=\"en_US\" \/>\n\t\t<meta property=\"og:site_name\" content=\"PCB &amp; MCPCB - EBest PCB - More Technical Details &amp; News on PCB, MCPCB &amp; Ceramic PCB from EBest PCB\" \/>\n\t\t<meta property=\"og:type\" content=\"article\" \/>\n\t\t<meta property=\"og:title\" content=\"VNA Isolation Calibration: Measure the DUT, Not Port Leakage - PCB &amp; MCPCB - EBest PCB\" \/>\n\t\t<meta property=\"og:description\" content=\"Know when to use VNA isolation calibration. Terminate both ports, verify with an independent attenuator, and bound leakage error in RF PCB tests.\" \/>\n\t\t<meta property=\"og:url\" content=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-isolation-calibration\/\" \/>\n\t\t<meta property=\"og:image\" content=\"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2025\/08\/logo.png\" \/>\n\t\t<meta property=\"og:image:secure_url\" content=\"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2025\/08\/logo.png\" \/>\n\t\t<meta property=\"article:published_time\" content=\"2026-11-16T17:09:26+00:00\" \/>\n\t\t<meta property=\"article:modified_time\" content=\"2026-11-16T17:11:13+00:00\" \/>\n\t\t<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/Bestpcbs1\" \/>\n\t\t<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n\t\t<meta name=\"twitter:site\" content=\"@bestpcbs\" \/>\n\t\t<meta name=\"twitter:title\" content=\"VNA Isolation Calibration: Measure the DUT, Not Port Leakage - PCB &amp; MCPCB - EBest PCB\" \/>\n\t\t<meta name=\"twitter:description\" content=\"Know when to use VNA isolation calibration. Terminate both ports, verify with an independent attenuator, and bound leakage error in RF PCB tests.\" \/>\n\t\t<meta name=\"twitter:creator\" content=\"@bestpcbs\" \/>\n\t\t<meta name=\"twitter:image\" content=\"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2016\/02\/logo.gif\" \/>\n\t\t<script type=\"application\/ld+json\" class=\"aioseo-schema\">\n\t\t\t{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"BlogPosting\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/vna-isolation-calibration\\\/#blogposting\",\"name\":\"VNA Isolation Calibration: Measure the DUT, Not Port Leakage - PCB & MCPCB - EBest PCB\",\"headline\":\"VNA Isolation Calibration: Measure the DUT, Not Port Leakage\",\"author\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/author\\\/gong588\\\/#author\"},\"publisher\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/#organization\"},\"image\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/vna-isolation-calibration-feature.jpg\",\"width\":1200,\"height\":600},\"datePublished\":\"2026-11-17T01:09:26+08:00\",\"dateModified\":\"2026-11-17T01:11:13+08:00\",\"inLanguage\":\"en-US\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/vna-isolation-calibration\\\/#webpage\"},\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/vna-isolation-calibration\\\/#webpage\"},\"articleSection\":\"bestpcb, RF Isolation Measurement, vna calibration, VNA Crosstalk, VNA Isolation Calibration\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/vna-isolation-calibration\\\/#breadcrumblist\",\"itemListElement\":[{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/#listItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/category\\\/bestpcb\\\/#listItem\",\"name\":\"bestpcb\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/category\\\/bestpcb\\\/#listItem\",\"position\":2,\"name\":\"bestpcb\",\"item\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/category\\\/bestpcb\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/vna-isolation-calibration\\\/#listItem\",\"name\":\"VNA Isolation Calibration: Measure the DUT, Not Port Leakage\"},\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/#listItem\",\"name\":\"Home\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/vna-isolation-calibration\\\/#listItem\",\"position\":3,\"name\":\"VNA Isolation Calibration: Measure the DUT, Not Port Leakage\",\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/category\\\/bestpcb\\\/#listItem\",\"name\":\"bestpcb\"}}]},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/#organization\",\"name\":\"PCB & MCPCB - Best Technology\",\"description\":\"More Technical Details & News on PCB, MCPCB & Ceramic PCB from EBest PCB\",\"url\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/\",\"telephone\":\"+8675529091601\",\"logo\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/wp-content\\\/uploads\\\/2025\\\/08\\\/logo.png\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/vna-isolation-calibration\\\/#organizationLogo\"},\"image\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/vna-isolation-calibration\\\/#organizationLogo\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/Bestpcbs1\",\"https:\\\/\\\/twitter.com\\\/bestpcbs\",\"https:\\\/\\\/www.youtube.com\\\/channel\\\/UCJsTR02i6mtLFnBBNC_i4bQ\\\/featured\",\"https:\\\/\\\/www.linkedin.com\\\/company\\\/best-pcb-technology\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/author\\\/gong588\\\/#author\",\"url\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/author\\\/gong588\\\/\",\"name\":\"mingling, gong\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/vna-isolation-calibration\\\/#authorImage\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/37717913504b7ea1df97ec73d58a7bcc?s=96&d=mm&r=g\",\"width\":96,\"height\":96,\"caption\":\"mingling, gong\"}},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/vna-isolation-calibration\\\/#webpage\",\"url\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/vna-isolation-calibration\\\/\",\"name\":\"VNA Isolation Calibration: Measure the DUT, Not Port Leakage - PCB & MCPCB - EBest PCB\",\"description\":\"Know when to use VNA isolation calibration. Terminate both ports, verify with an independent attenuator, and bound leakage error in RF PCB tests.\",\"inLanguage\":\"en-US\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/#website\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/vna-isolation-calibration\\\/#breadcrumblist\"},\"author\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/author\\\/gong588\\\/#author\"},\"creator\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/author\\\/gong588\\\/#author\"},\"image\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/vna-isolation-calibration-feature.jpg\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/vna-isolation-calibration\\\/#mainImage\",\"width\":1200,\"height\":600},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/vna-isolation-calibration\\\/#mainImage\"},\"datePublished\":\"2026-11-17T01:09:26+08:00\",\"dateModified\":\"2026-11-17T01:11:13+08:00\"},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/#website\",\"url\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/\",\"name\":\"PCB & MCPCB - Best Technology\",\"description\":\"More Technical Details & News on PCB, MCPCB & Ceramic PCB from EBest PCB\",\"inLanguage\":\"en-US\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/#organization\"}}]}\n\t\t<\/script>\n\t\t<!-- All in One SEO -->\n\n","aioseo_head_json":{"title":"VNA Isolation Calibration: Measure the DUT, Not Port Leakage - PCB & MCPCB - EBest PCB","description":"Know when to use VNA isolation calibration. Terminate both ports, verify with an independent attenuator, and bound leakage error in RF PCB tests.","canonical_url":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-isolation-calibration\/","robots":"max-image-preview:large","keywords":"","webmasterTools":{"miscellaneous":""},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"BlogPosting","@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-isolation-calibration\/#blogposting","name":"VNA Isolation Calibration: Measure the DUT, Not Port Leakage - PCB & MCPCB - EBest PCB","headline":"VNA Isolation Calibration: Measure the DUT, Not Port Leakage","author":{"@id":"https:\/\/www.bestpcbs.com\/blog\/author\/gong588\/#author"},"publisher":{"@id":"https:\/\/www.bestpcbs.com\/blog\/#organization"},"image":{"@type":"ImageObject","url":"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2026\/11\/vna-isolation-calibration-feature.jpg","width":1200,"height":600},"datePublished":"2026-11-17T01:09:26+08:00","dateModified":"2026-11-17T01:11:13+08:00","inLanguage":"en-US","mainEntityOfPage":{"@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-isolation-calibration\/#webpage"},"isPartOf":{"@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-isolation-calibration\/#webpage"},"articleSection":"bestpcb, RF Isolation Measurement, vna calibration, VNA Crosstalk, VNA Isolation Calibration"},{"@type":"BreadcrumbList","@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-isolation-calibration\/#breadcrumblist","itemListElement":[{"@type":"ListItem","@id":"https:\/\/www.bestpcbs.com\/blog\/#listItem","position":1,"name":"Home","item":"https:\/\/www.bestpcbs.com\/blog\/","nextItem":{"@type":"ListItem","@id":"https:\/\/www.bestpcbs.com\/blog\/category\/bestpcb\/#listItem","name":"bestpcb"}},{"@type":"ListItem","@id":"https:\/\/www.bestpcbs.com\/blog\/category\/bestpcb\/#listItem","position":2,"name":"bestpcb","item":"https:\/\/www.bestpcbs.com\/blog\/category\/bestpcb\/","nextItem":{"@type":"ListItem","@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-isolation-calibration\/#listItem","name":"VNA Isolation Calibration: Measure the DUT, Not Port Leakage"},"previousItem":{"@type":"ListItem","@id":"https:\/\/www.bestpcbs.com\/blog\/#listItem","name":"Home"}},{"@type":"ListItem","@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-isolation-calibration\/#listItem","position":3,"name":"VNA Isolation Calibration: Measure the DUT, Not Port Leakage","previousItem":{"@type":"ListItem","@id":"https:\/\/www.bestpcbs.com\/blog\/category\/bestpcb\/#listItem","name":"bestpcb"}}]},{"@type":"Organization","@id":"https:\/\/www.bestpcbs.com\/blog\/#organization","name":"PCB & MCPCB - Best Technology","description":"More Technical Details & News on PCB, MCPCB & Ceramic PCB from EBest PCB","url":"https:\/\/www.bestpcbs.com\/blog\/","telephone":"+8675529091601","logo":{"@type":"ImageObject","url":"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2025\/08\/logo.png","@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-isolation-calibration\/#organizationLogo"},"image":{"@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-isolation-calibration\/#organizationLogo"},"sameAs":["https:\/\/www.facebook.com\/Bestpcbs1","https:\/\/twitter.com\/bestpcbs","https:\/\/www.youtube.com\/channel\/UCJsTR02i6mtLFnBBNC_i4bQ\/featured","https:\/\/www.linkedin.com\/company\/best-pcb-technology"]},{"@type":"Person","@id":"https:\/\/www.bestpcbs.com\/blog\/author\/gong588\/#author","url":"https:\/\/www.bestpcbs.com\/blog\/author\/gong588\/","name":"mingling, gong","image":{"@type":"ImageObject","@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-isolation-calibration\/#authorImage","url":"https:\/\/secure.gravatar.com\/avatar\/37717913504b7ea1df97ec73d58a7bcc?s=96&d=mm&r=g","width":96,"height":96,"caption":"mingling, gong"}},{"@type":"WebPage","@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-isolation-calibration\/#webpage","url":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-isolation-calibration\/","name":"VNA Isolation Calibration: Measure the DUT, Not Port Leakage - PCB & MCPCB - EBest PCB","description":"Know when to use VNA isolation calibration. Terminate both ports, verify with an independent attenuator, and bound leakage error in RF PCB tests.","inLanguage":"en-US","isPartOf":{"@id":"https:\/\/www.bestpcbs.com\/blog\/#website"},"breadcrumb":{"@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-isolation-calibration\/#breadcrumblist"},"author":{"@id":"https:\/\/www.bestpcbs.com\/blog\/author\/gong588\/#author"},"creator":{"@id":"https:\/\/www.bestpcbs.com\/blog\/author\/gong588\/#author"},"image":{"@type":"ImageObject","url":"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2026\/11\/vna-isolation-calibration-feature.jpg","@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-isolation-calibration\/#mainImage","width":1200,"height":600},"primaryImageOfPage":{"@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-isolation-calibration\/#mainImage"},"datePublished":"2026-11-17T01:09:26+08:00","dateModified":"2026-11-17T01:11:13+08:00"},{"@type":"WebSite","@id":"https:\/\/www.bestpcbs.com\/blog\/#website","url":"https:\/\/www.bestpcbs.com\/blog\/","name":"PCB & MCPCB - Best Technology","description":"More Technical Details & News on PCB, MCPCB & Ceramic PCB from EBest PCB","inLanguage":"en-US","publisher":{"@id":"https:\/\/www.bestpcbs.com\/blog\/#organization"}}]},"og:locale":"en_US","og:site_name":"PCB &amp; MCPCB - EBest PCB - More Technical Details &amp; News on PCB, MCPCB &amp; Ceramic PCB from EBest PCB","og:type":"article","og:title":"VNA Isolation Calibration: Measure the DUT, Not Port Leakage - PCB &amp; MCPCB - EBest PCB","og:description":"Know when to use VNA isolation calibration. Terminate both ports, verify with an independent attenuator, and bound leakage error in RF PCB tests.","og:url":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-isolation-calibration\/","og:image":"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2025\/08\/logo.png","og:image:secure_url":"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2025\/08\/logo.png","article:published_time":"2026-11-16T17:09:26+00:00","article:modified_time":"2026-11-16T17:11:13+00:00","article:publisher":"https:\/\/www.facebook.com\/Bestpcbs1","twitter:card":"summary_large_image","twitter:site":"@bestpcbs","twitter:title":"VNA Isolation Calibration: Measure the DUT, Not Port Leakage - PCB &amp; MCPCB - EBest PCB","twitter:description":"Know when to use VNA isolation calibration. Terminate both ports, verify with an independent attenuator, and bound leakage error in RF PCB tests.","twitter:creator":"@bestpcbs","twitter:image":"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2016\/02\/logo.gif"},"aioseo_meta_data":{"post_id":"39213","title":null,"description":null,"keywords":null,"keyphrases":{"focus":[],"additional":[]},"primary_term":null,"canonical_url":null,"og_title":null,"og_description":null,"og_object_type":"default","og_image_type":"default","og_image_url":null,"og_image_width":null,"og_image_height":null,"og_image_custom_url":null,"og_image_custom_fields":null,"og_video":null,"og_custom_url":null,"og_article_section":null,"og_article_tags":null,"twitter_use_og":false,"twitter_card":"default","twitter_image_type":"default","twitter_image_url":null,"twitter_image_custom_url":null,"twitter_image_custom_fields":null,"twitter_title":null,"twitter_description":null,"schema":{"blockGraphs":[],"customGraphs":[],"default":{"data":{"Article":[],"Course":[],"Dataset":[],"FAQPage":[],"Movie":[],"Person":[],"Product":[],"ProductReview":[],"Car":[],"Recipe":[],"Service":[],"SoftwareApplication":[],"WebPage":[]},"graphName":"BlogPosting","isEnabled":true},"graphs":[]},"schema_type":"default","schema_type_options":null,"pillar_content":false,"robots_default":true,"robots_noindex":false,"robots_noarchive":false,"robots_nosnippet":false,"robots_nofollow":false,"robots_noimageindex":false,"robots_noodp":false,"robots_notranslate":false,"robots_max_snippet":null,"robots_max_videopreview":null,"robots_max_imagepreview":"large","priority":null,"frequency":null,"local_seo":null,"breadcrumb_settings":null,"limit_modified_date":false,"ai":null,"created":"2026-11-16 17:09:44","updated":"2026-11-17 00:44:17","seo_analyzer_scan_date":null,"focus_keyword":null,"additional_keywords":null,"truseo_locale":null},"aioseo_breadcrumb":"<div class=\"aioseo-breadcrumbs\"><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/www.bestpcbs.com\/blog\/\" title=\"Home\">Home<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">\u00bb<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/www.bestpcbs.com\/blog\/category\/bestpcb\/\" title=\"bestpcb\">bestpcb<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">\u00bb<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\tVNA Isolation Calibration: Measure the DUT, Not Port Leakage\n\t\t<\/span><\/div>","aioseo_breadcrumb_json":[{"label":"Home","link":"https:\/\/www.bestpcbs.com\/blog\/"},{"label":"bestpcb","link":"https:\/\/www.bestpcbs.com\/blog\/category\/bestpcb\/"},{"label":"VNA Isolation Calibration: Measure the DUT, Not Port Leakage","link":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-isolation-calibration\/"}],"_links":{"self":[{"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/posts\/39213","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/users\/32827"}],"replies":[{"embeddable":true,"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/comments?post=39213"}],"version-history":[{"count":2,"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/posts\/39213\/revisions"}],"predecessor-version":[{"id":39216,"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/posts\/39213\/revisions\/39216"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/media\/39212"}],"wp:attachment":[{"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/media?parent=39213"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/categories?post=39213"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/tags?post=39213"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}