


{"id":39191,"date":"2026-11-16T23:20:08","date_gmt":"2026-11-16T15:20:08","guid":{"rendered":"https:\/\/www.bestpcbs.com\/blog\/?p=39191"},"modified":"2026-11-17T01:10:37","modified_gmt":"2026-11-16T17:10:37","slug":"s21-vs-s12","status":"publish","type":"post","link":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s21-vs-s12\/","title":{"rendered":"S21 vs. S12: Why Your VNA Traces Disagree on an RF PCB"},"content":{"rendered":"<div id=\"ez-toc-container\" class=\"ez-toc-v2_0_89 ez-toc-wrap-left counter-hierarchy ez-toc-counter ez-toc-grey ez-toc-container-direction\">\n<div class=\"ez-toc-title-container\">\n<p class=\"ez-toc-title\" style=\"cursor:inherit\">Table of Contents<\/p>\n<span class=\"ez-toc-title-toggle\"><a href=\"#\" class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" aria-label=\"Toggle Table of Content\"><span class=\"ez-toc-js-icon-con\"><span class=\"\"><span class=\"eztoc-hide\" style=\"display:none;\">Toggle<\/span><span class=\"ez-toc-icon-toggle-span\"><svg style=\"fill: #999;color:#999\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" class=\"list-377408\" width=\"20px\" height=\"20px\" viewBox=\"0 0 24 24\" fill=\"none\"><path d=\"M6 6H4v2h2V6zm14 0H8v2h12V6zM4 11h2v2H4v-2zm16 0H8v2h12v-2zM4 16h2v2H4v-2zm16 0H8v2h12v-2z\" fill=\"currentColor\"><\/path><\/svg><svg style=\"fill: #999;color:#999\" class=\"arrow-unsorted-368013\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" width=\"10px\" height=\"10px\" viewBox=\"0 0 24 24\" version=\"1.2\" baseProfile=\"tiny\"><path d=\"M18.2 9.3l-6.2-6.3-6.2 6.3c-.2.2-.3.4-.3.7s.1.5.3.7c.2.2.4.3.7.3h11c.3 0 .5-.1.7-.3.2-.2.3-.5.3-.7s-.1-.5-.3-.7zM5.8 14.7l6.2 6.3 6.2-6.3c.2-.2.3-.5.3-.7s-.1-.5-.3-.7c-.2-.2-.4-.3-.7-.3h-11c-.3 0-.5.1-.7.3-.2.2-.3.5-.3.7s.1.5.3.7z\"\/><\/svg><\/span><\/span><\/span><\/a><\/span><\/div>\n<nav><ul class='ez-toc-list ez-toc-list-level-1 ' ><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s21-vs-s12\/#S21_vs_S12_Which_Direction_Is_Each_Trace\" >S21 vs. S12: Which Direction Is Each Trace?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s21-vs-s12\/#Reciprocal_Network_What_Should_and_Should_Not_Match\" >Reciprocal Network: What Should and Should Not Match?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s21-vs-s12\/#S21_and_S12_Equal_dB_Can_Still_Hide_a_Phase_Error\" >S21 and S12: Equal dB Can Still Hide a Phase Error<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-4\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s21-vs-s12\/#VNA_Calibration_Verify_Forward_and_Reverse_Before_Reconnecting\" >VNA Calibration: Verify Forward and Reverse Before Reconnecting<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-5\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s21-vs-s12\/#VNA_Dynamic_Range_Find_Where_the_Comparison_Stops_Being_Useful\" >VNA Dynamic Range: Find Where the Comparison Stops Being Useful<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-6\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s21-vs-s12\/#Touchstone_File_Compare_Each_Processing_Stage\" >Touchstone File: Compare Each Processing Stage<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-7\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s21-vs-s12\/#S-Parameter_Reciprocity_in_Three_PCB_Measurement_Tasks\" >S-Parameter Reciprocity in Three PCB Measurement Tasks<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-8\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s21-vs-s12\/#VNA_Measurement_Uncertainty_What_Goes_in_the_Release_Report\" >VNA Measurement Uncertainty: What Goes in the Release Report?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-9\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s21-vs-s12\/#S21_vs_S12_FAQs\" >S21 vs. S12 FAQs<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-10\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s21-vs-s12\/#Technical_References\" >Technical References<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-11\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s21-vs-s12\/#Custom_RF_PCB_Fabrication_With_Stackup_and_Launch_Review\" >Custom RF PCB Fabrication With Stackup and Launch Review<\/a><\/li><\/ul><\/nav><\/div>\n<div class=\"yzp-no-index\"><\/div><p>If a passive PCB coupon expected to be reciprocal gives you different S21 and S12, compare the <strong>complex transmission coefficients<\/strong>, not just the two dB traces. Then put a known reciprocal verification device at the same calibration planes and measure it in both directions. If the reference shows the same mismatch, fix the setup before blaming the board. If the VNA agrees but the exported file does not, inspect the file and processing chain before measuring again.<\/p>\n<figure><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2026\/11\/s21-vs-s12.jpg\" width=\"1200\" height=\"600\" style=\"display:block;max-width:100%;height:auto\" alt=\"Two-port RF PCB test coupon with connectors at opposite ends on a workbench\"><figcaption>A two-port PCB coupon has a forward and reverse transmission path. Confirm both directions at the same reference planes.<\/figcaption><\/figure>\n<h2><span class=\"ez-toc-section\" id=\"S21_vs_S12_Which_Direction_Is_Each_Trace\"><\/span>S21 vs. S12: Which Direction Is Each Trace?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>The first index is the response port; the second is the driven port. S21 is the outgoing wave at port 2 divided by the incident wave at port 1, with no incident wave from port 2. S12 reverses the drive and response with the same port numbers. The other port is terminated in the measurement reference impedance for the coefficient definition. Changing the drive direction does not mean renumbering the connectors on the board.<\/p>\n<p>Both coefficients have magnitude and phase. Displaying 20 log<sub>10<\/sub> of their magnitudes answers how much the signal is attenuated or amplified, not whether their complex values agree. Keep a port map showing the board end, cable and VNA port so another engineer can reproduce the setup after a reconnect.<\/p>\n<figure><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2026\/11\/s21-s12-direction.jpg\" width=\"1200\" height=\"600\" style=\"display:block;max-width:100%;height:auto\" alt=\"Two-port diagram showing S21 from port 1 to port 2 and S12 from port 2 to port 1\"><figcaption>Keep port labels fixed. Drive each port in turn and measure the opposite port.<\/figcaption><\/figure>\n<h2><span class=\"ez-toc-section\" id=\"Reciprocal_Network_What_Should_and_Should_Not_Match\"><\/span>Reciprocal Network: What Should and Should Not Match?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>For an ordinary reciprocal two-port measured with equal real reference impedances and consistent power-wave normalization, S21 = S12 at the same frequency and reference planes. This is equality of the full complex values. The two reflections, S11 and S22, need not match: a board can have a different connector launch on each end and still transmit reciprocally. For a compatible multiport basis, the comparison is against the plain matrix transpose, not its complex conjugate.<\/p>\n<p>Reciprocity is separate from passivity. A correctly specified ferrite isolator, for example, can be passive while intentionally attenuating reverse transmission more than forward transmission. A biased active stage can also be direction-dependent. Check the intended function, terminations, bias and power setting before applying a reciprocal-coupon release rule. Use the <a href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s-parameter-passivity-check\/\">S-parameter passivity check<\/a> separately if the model must also satisfy a passive power bound.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"S21_and_S12_Equal_dB_Can_Still_Hide_a_Phase_Error\"><\/span>S21 and S12: Equal dB Can Still Hide a Phase Error<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p><strong>Illustrative values at 5 GHz:<\/strong> S21 = 0.50 at 0\u00b0 and S12 = 0.50 at +10\u00b0. Both magnitude readings are \u22126.02 dB. In rectangular form, S21 is 0.5000 + j0 and S12 is about 0.4924 + j0.0868. Their complex difference has magnitude <strong>0.0872<\/strong>. If you subtract only their dB values, you find zero and miss the disagreement.<\/p>\n<p>Plot the absolute residual |S21 \u2212 S12| versus frequency using linear complex values. For two equal magnitudes A and phase difference \u0394\u03c6 its value is 2A \u00d7 |sin(\u0394\u03c6\/2)|. Do not use a large phase swing at a very small signal level as stand-alone evidence; first establish that both measurements are above the usable noise and leakage limits. The residual is dimensionless, not dB.<\/p>\n<figure><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2026\/11\/s21-s12-complex-residual.jpg\" width=\"1200\" height=\"600\" style=\"display:block;max-width:100%;height:auto\" alt=\"Illustrative complex-plane sketch of equal 0.50 magnitudes at zero and positive ten degrees with a residual of 0.0872\"><figcaption>Same magnitude, different phase. The chord between the two endpoints is the complex residual, not a subtraction of dB values.<\/figcaption><\/figure>\n<h2><span class=\"ez-toc-section\" id=\"VNA_Calibration_Verify_Forward_and_Reverse_Before_Reconnecting\"><\/span>VNA Calibration: Verify Forward and Reverse Before Reconnecting<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<ol>\n<li><strong>State the reference planes.<\/strong> Record cable orientation, adapters, fixture, connector condition, calibration method, sweep grid, source power and IF bandwidth. Use an applicable full two-port correction at the agreed planes, such as SOLT for appropriate coaxial standards or a qualified TRL setup for a fixture.<\/li>\n<li><strong>Measure an independent reciprocal reference at those planes.<\/strong> An appropriate verification thru, line or attenuator should be independent of the solve and suit the band and loss of interest. A low-loss thru alone does not qualify a deep stopband. Record both phase and magnitude.<\/li>\n<li><strong>Repeat the DUT without an avoidable setup change.<\/strong> First capture both VNA directions without physically swapping the cables. If a reversal check is needed, keep the calibrated cables and adapters fixed as far as practical, document which board end goes to which port, and recheck the reference after reconnecting. Do not interpret a reversed setup as a clean confirmation if a cable had to move substantially.<\/li>\n<\/ol>\n<p>Keysight describes distinct forward and reverse terms in full two-port error correction. A good trace in one direction does not validate the other. A mismatch that appears on the reference is a reason to check the instrument path, not proof that a particular receiver or switch failed.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"VNA_Dynamic_Range_Find_Where_the_Comparison_Stops_Being_Useful\"><\/span>VNA Dynamic Range: Find Where the Comparison Stops Being Useful<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>In a deep stopband, the reverse trace may be dominated by instrument noise or residual leakage rather than transmission through the filter. Check a suitable terminated or isolated reference under the same sweep settings, then repeat both traces at a verified lower IF bandwidth. Noise can decrease while systematic leakage stays. If either direction remains too close to the established floor, flag the band as inconclusive rather than publishing a direction-specific isolation number.<\/p>\n<p>If a stable residual remains after the noise check, use the <a href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/vna-isolation-calibration\/\">VNA isolation calibration guide<\/a> to decide whether to use the optional correction and verify it against an independent attenuator before comparing the two directions.<\/p>\n<figure class=\"wp-block-table\" style=\"max-width:100%;overflow-x:auto\">\n<table>\n<thead>\n<tr>\n<th scope=\"col\">Observed pattern<\/th>\n<th scope=\"col\">Next discriminating check<\/th>\n<th scope=\"col\">Decision<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<th scope=\"row\">Same dB, phase split in the passband<\/th>\n<td>Compare raw complex traces with an independent reciprocal reference at unchanged planes.<\/td>\n<td>If the reference shows the split, requalify the setup; do not reject the PCB.<\/td>\n<\/tr>\n<tr>\n<th scope=\"row\">Difference mainly near the stopband floor<\/th>\n<td>Check residual leakage and repeat both directions with verified measurement settings.<\/td>\n<td>If acceptable uncertainty cannot be shown, report the band as inconclusive.<\/td>\n<\/tr>\n<tr>\n<th scope=\"row\">Raw traces agree; processed file does not<\/th>\n<td>Re-import the raw export, then apply reference corrections and transforms one step at a time.<\/td>\n<td>Fix the step that introduced the mismatch rather than hiding it by copying a column.<\/td>\n<\/tr>\n<tr>\n<th scope=\"row\">Difference persists with a clean reference<\/th>\n<td>Check expected directionality, fixture removal, port maps and stimulus-dependent behavior; repeat independently.<\/td>\n<td>Escalate before declaring nonreciprocity on an ordinary PCB coupon.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/figure>\n<h2><span class=\"ez-toc-section\" id=\"Touchstone_File_Compare_Each_Processing_Stage\"><\/span>Touchstone File: Compare Each Processing Stage<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Save the instrument traces and the untouched file before renormalization, de-embedding, port extension or mixed-mode conversion. Check the frequency units, data format (RI, MA or DB), port map and real reference resistance. In conventional two-port Version 1 data the file lists S11, S21, S12, S22. Touchstone 2.1 allows an explicit <code>[Two-Port Data Order]<\/code>. Read it rather than imposing an order. Check <code>[Matrix Format]<\/code> too: a triangular file format can encode assumed symmetry and cannot independently prove that both directions were measured.<\/p>\n<p>Re-import with a compatible reader and compare known complex samples against the instrument first. Then replay each processing step. A plain exchange of S21 and S12 <em>by itself<\/em> changes the sign of S21 \u2212 S12 but not its magnitude; a new nonzero residual points to another mismatch, such as a wrong column, inconsistent reference correction, grid alignment, or asymmetric processing. Never replace the reverse trace with the forward trace to make an undiagnosed problem vanish.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"S-Parameter_Reciprocity_in_Three_PCB_Measurement_Tasks\"><\/span>S-Parameter Reciprocity in Three PCB Measurement Tasks<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<h3>PCB interconnect coupon<\/h3>\n<p>Use the raw two-direction data to qualify a passive trace and its launches. For a representative verification condition, compare trace residual over the required band and recheck the references if the ports have been disturbed. Release only if the residual meets the agreed data-quality limit and the coupon meets its own insertion-loss and reflection requirements. Different S11 and S22 can still matter to the system even if reciprocity passes.<\/p>\n<h3>RF filter on an assembled board<\/h3>\n<p>Compare the two transmission directions in the passband and establish usable measurement range in the stopband. Keep fixture terminations and any bias networks in the defined configuration. Report measurable bands separately from floor-limited bands; do not accept a stopband number simply because forward and reverse both look flat at the instrument floor.<\/p>\n<h3>PCB with an isolator or active RF chain<\/h3>\n<p>The design may intentionally have unequal transmissions. Verify the expected forward direction and reverse isolation against its specification at the specified bias, power and termination. Reversing a connectorized fixture still requires a defined port map. For a three-port device report the unused-port termination and do not infer the complete multiport behavior from a two-port subset.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"VNA_Measurement_Uncertainty_What_Goes_in_the_Release_Report\"><\/span>VNA Measurement Uncertainty: What Goes in the Release Report?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Use this worksheet to review a new S2P file. The test plan must define frequency bands, expected network class, reporting metric, validation reference and evidence for the decision limit. A set of repeat sweeps estimates repeatability but does not by itself bound systematic errors. Have the lab include validated calibration, fixture, dynamic-range and reference-check contributions appropriate to the band.<\/p>\n<figure class=\"wp-block-table\" style=\"max-width:100%;overflow-x:auto\">\n<table>\n<thead>\n<tr>\n<th scope=\"col\">Required evidence<\/th>\n<th scope=\"col\">What to record<\/th>\n<th scope=\"col\">If missing<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<th scope=\"row\">Comparable data<\/th>\n<td>Port mapping, same planes, impedances, operating state and frequency grid; two measured directions.<\/td>\n<td>Hold the comparison. A symmetrical export is not independent evidence.<\/td>\n<\/tr>\n<tr>\n<th scope=\"row\">Uncertainty and usable band<\/th>\n<td>Calibration and independent checks, residual repeatability, receiver limits and decision rule.<\/td>\n<td>Flag measurements outside the validated band or level as inconclusive.<\/td>\n<\/tr>\n<tr>\n<th scope=\"row\">Illustrative decision at 5 GHz<\/th>\n<td>|S21 \u2212 S12| = 0.0872; assume a project-specific review trigger of 0.0200 for this example.<\/td>\n<td>0.0872 exceeds 0.0200. Hold the file and localize the cause; this alone does not establish a faulty PCB.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/figure>\n<p>The example trigger is not an IPC threshold or an instrument specification. If the report cannot show how the setup supports a limit, request the missing evidence before qualifying the file or changing the fixture.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"S21_vs_S12_FAQs\"><\/span>S21 vs. S12 FAQs<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<h3>Do S21 and S12 have to be the same on every passive PCB?<\/h3>\n<p>No. Confirm the network is expected to be reciprocal and the two measurements have comparable references. A passive isolator is a counterexample.<\/p>\n<h3>Can S11 and S22 differ on a reciprocal board?<\/h3>\n<p>Yes. Reciprocity relates exchanged transmission terms. Different launches or impedances at the two ends can give different reflections.<\/p>\n<h3>Why can the two traces match in dB but disagree in the file?<\/h3>\n<p>A dB plot omits phase. Compare the real and imaginary components, or reconstruct them from magnitude and phase before subtracting.<\/p>\n<h3>Does swapping the two VNA cables prove the PCB is directional?<\/h3>\n<p>No. You may also change cable shape, contact repeatability or calibration planes. Keep a board-end map and verify the calibrated paths.<\/p>\n<h3>Can a lower IF bandwidth fix S21 and S12 disagreement?<\/h3>\n<p>It can reduce random receiver noise. It does not undo a wrong reference plane, fixture model, or stable leakage path.<\/p>\n<h3>Can I use a reciprocal thru to validate reverse isolation?<\/h3>\n<p>A thru is a useful basic check but normally does not establish the uncertainty at the much lower transmission level of an isolation measurement.<\/p>\n<h3>Does a symmetric Touchstone file prove the two directions were measured?<\/h3>\n<p>No. A reader can fill missing entries from triangular storage. Ask for the measured full two-direction data and the export settings.<\/p>\n<h3>Should I average S21 and S12 to repair a file?<\/h3>\n<p>Keep the raw data independent. Use symmetry constraints only as a documented model decision after establishing that the network is reciprocal and understanding the original discrepancy.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"Technical_References\"><\/span>Technical References<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<ul>\n<li><a href=\"https:\/\/www.rohde-schwarz.com\/sg\/products\/test-and-measurement\/essentials-test-equipment\/spectrum-analyzers\/understanding-s-parameters_257831.html\" rel=\"nofollow\">Rohde &amp; Schwarz: Understanding S-parameters<\/a> \u2014 coefficient definitions and complex data.<\/li>\n<li><a href=\"https:\/\/helpfiles.keysight.com\/csg\/e5071c\/measurement\/calibration\/basic_calibrations\/full_2_port_calibration.htm\" rel=\"nofollow\">Keysight: Full 2-Port Calibration<\/a> \u2014 direction-dependent correction terms.<\/li>\n<li><a href=\"https:\/\/ibis.org\/touchstone_ver2.1\/\" rel=\"nofollow\">IBIS Open Forum: Touchstone Version 2.1<\/a> \u2014 port data order, reference resistance and matrix format.<\/li>\n<li><a href=\"https:\/\/scikit-rf.readthedocs.io\/en\/latest\/api\/generated\/skrf.network.Network.reciprocity.html\" rel=\"nofollow\">scikit-rf: Reciprocity residual<\/a> \u2014 transpose-based implementation.<\/li>\n<li><a href=\"https:\/\/www.skyworksinc.com\/-\/media\/SkyWorks\/Documents\/Articles\/MPD_06_2015.pdf\" rel=\"nofollow\">Skyworks: Broadband ferrite isolator for interstage applications<\/a> \u2014 a device with specified insertion loss and isolation.<\/li>\n<\/ul>\n<h2><span class=\"ez-toc-section\" id=\"Custom_RF_PCB_Fabrication_With_Stackup_and_Launch_Review\"><\/span>Custom RF PCB Fabrication With Stackup and Launch Review<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Send EBest Circuit your RF PCB files, required impedance, connector footprint and operating band to flag stackup and launch constraints before the prototype build. Include coupon or report requirements if they are part of acceptance. <a href=\"mailto:sales@bestpcbs.com\">Request an RF PCB quote and DFM review<\/a> to agree on the build and verification scope before ordering.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Find out why S21 and S12 differ. Compare complex data, check both VNA directions, and distinguish PCB behavior from calibration or export errors.<\/p>\n","protected":false},"author":32827,"featured_media":39190,"comment_status":"open","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"_uf_show_specific_survey":0,"_uf_disable_surveys":false,"footnotes":""},"categories":[174],"tags":[9473,9472,9212,9452],"class_list":["post-39191","post","type-post","status-publish","format-standard","hentry","category-bestpcb","tag-s-parameter-reciprocity","tag-s21-vs-s12","tag-touchstone-files","tag-vna-calibration"],"acf":[],"aioseo_notices":[],"aioseo_head":"\n\t\t<!-- All in One SEO 5.0.4 - aioseo.com -->\n\t<meta name=\"description\" content=\"Find out why S21 and S12 differ. Compare complex data, check both VNA directions, and distinguish PCB behavior from calibration or export errors.\" \/>\n\t<meta name=\"robots\" content=\"max-image-preview:large\" \/>\n\t<meta name=\"author\" content=\"mingling, gong\"\/>\n\t<link rel=\"canonical\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s21-vs-s12\/\" \/>\n\t\t<meta name=\"generator\" content=\"All in One SEO (AIOSEO) 5.0.4\" \/>\n\t\t<meta property=\"og:locale\" content=\"en_US\" \/>\n\t\t<meta property=\"og:site_name\" content=\"PCB &amp; MCPCB - EBest PCB - More Technical Details &amp; News on PCB, MCPCB &amp; Ceramic PCB from EBest PCB\" \/>\n\t\t<meta property=\"og:type\" content=\"article\" \/>\n\t\t<meta property=\"og:title\" content=\"S21 vs. S12: Why Your VNA Traces Disagree on an RF PCB - PCB &amp; MCPCB - EBest PCB\" \/>\n\t\t<meta property=\"og:description\" content=\"Find out why S21 and S12 differ. Compare complex data, check both VNA directions, and distinguish PCB behavior from calibration or export errors.\" \/>\n\t\t<meta property=\"og:url\" content=\"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s21-vs-s12\/\" \/>\n\t\t<meta property=\"og:image\" content=\"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2025\/08\/logo.png\" \/>\n\t\t<meta property=\"og:image:secure_url\" content=\"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2025\/08\/logo.png\" \/>\n\t\t<meta property=\"article:published_time\" content=\"2026-11-16T15:20:08+00:00\" \/>\n\t\t<meta property=\"article:modified_time\" content=\"2026-11-16T17:10:37+00:00\" \/>\n\t\t<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/Bestpcbs1\" \/>\n\t\t<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n\t\t<meta name=\"twitter:site\" content=\"@bestpcbs\" \/>\n\t\t<meta name=\"twitter:title\" content=\"S21 vs. S12: Why Your VNA Traces Disagree on an RF PCB - PCB &amp; MCPCB - EBest PCB\" \/>\n\t\t<meta name=\"twitter:description\" content=\"Find out why S21 and S12 differ. Compare complex data, check both VNA directions, and distinguish PCB behavior from calibration or export errors.\" \/>\n\t\t<meta name=\"twitter:creator\" content=\"@bestpcbs\" \/>\n\t\t<meta name=\"twitter:image\" content=\"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2016\/02\/logo.gif\" \/>\n\t\t<script type=\"application\/ld+json\" class=\"aioseo-schema\">\n\t\t\t{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"BlogPosting\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/s21-vs-s12\\\/#blogposting\",\"name\":\"S21 vs. S12: Why Your VNA Traces Disagree on an RF PCB - PCB & MCPCB - EBest PCB\",\"headline\":\"S21 vs. S12: Why Your VNA Traces Disagree on an RF PCB\",\"author\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/author\\\/gong588\\\/#author\"},\"publisher\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/#organization\"},\"image\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/s21-vs-s12-feature.jpg\",\"width\":1200,\"height\":600},\"datePublished\":\"2026-11-16T23:20:08+08:00\",\"dateModified\":\"2026-11-17T01:10:37+08:00\",\"inLanguage\":\"en-US\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/s21-vs-s12\\\/#webpage\"},\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/s21-vs-s12\\\/#webpage\"},\"articleSection\":\"bestpcb, S-parameter reciprocity, S21 vs S12, Touchstone Files, vna calibration\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/s21-vs-s12\\\/#breadcrumblist\",\"itemListElement\":[{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/#listItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/category\\\/bestpcb\\\/#listItem\",\"name\":\"bestpcb\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/category\\\/bestpcb\\\/#listItem\",\"position\":2,\"name\":\"bestpcb\",\"item\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/category\\\/bestpcb\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/s21-vs-s12\\\/#listItem\",\"name\":\"S21 vs. S12: Why Your VNA Traces Disagree on an RF PCB\"},\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/#listItem\",\"name\":\"Home\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/s21-vs-s12\\\/#listItem\",\"position\":3,\"name\":\"S21 vs. S12: Why Your VNA Traces Disagree on an RF PCB\",\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/category\\\/bestpcb\\\/#listItem\",\"name\":\"bestpcb\"}}]},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/#organization\",\"name\":\"PCB & MCPCB - Best Technology\",\"description\":\"More Technical Details & News on PCB, MCPCB & Ceramic PCB from EBest PCB\",\"url\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/\",\"telephone\":\"+8675529091601\",\"logo\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/wp-content\\\/uploads\\\/2025\\\/08\\\/logo.png\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/s21-vs-s12\\\/#organizationLogo\"},\"image\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/s21-vs-s12\\\/#organizationLogo\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/Bestpcbs1\",\"https:\\\/\\\/twitter.com\\\/bestpcbs\",\"https:\\\/\\\/www.youtube.com\\\/channel\\\/UCJsTR02i6mtLFnBBNC_i4bQ\\\/featured\",\"https:\\\/\\\/www.linkedin.com\\\/company\\\/best-pcb-technology\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/author\\\/gong588\\\/#author\",\"url\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/author\\\/gong588\\\/\",\"name\":\"mingling, gong\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/s21-vs-s12\\\/#authorImage\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/37717913504b7ea1df97ec73d58a7bcc?s=96&d=mm&r=g\",\"width\":96,\"height\":96,\"caption\":\"mingling, gong\"}},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/s21-vs-s12\\\/#webpage\",\"url\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/s21-vs-s12\\\/\",\"name\":\"S21 vs. S12: Why Your VNA Traces Disagree on an RF PCB - PCB & MCPCB - EBest PCB\",\"description\":\"Find out why S21 and S12 differ. Compare complex data, check both VNA directions, and distinguish PCB behavior from calibration or export errors.\",\"inLanguage\":\"en-US\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/#website\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/s21-vs-s12\\\/#breadcrumblist\"},\"author\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/author\\\/gong588\\\/#author\"},\"creator\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/author\\\/gong588\\\/#author\"},\"image\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/s21-vs-s12-feature.jpg\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/s21-vs-s12\\\/#mainImage\",\"width\":1200,\"height\":600},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/11\\\/s21-vs-s12\\\/#mainImage\"},\"datePublished\":\"2026-11-16T23:20:08+08:00\",\"dateModified\":\"2026-11-17T01:10:37+08:00\"},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/#website\",\"url\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/\",\"name\":\"PCB & MCPCB - Best Technology\",\"description\":\"More Technical Details & News on PCB, MCPCB & Ceramic PCB from EBest PCB\",\"inLanguage\":\"en-US\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/#organization\"}}]}\n\t\t<\/script>\n\t\t<!-- All in One SEO -->\n\n","aioseo_head_json":{"title":"S21 vs. S12: Why Your VNA Traces Disagree on an RF PCB - PCB & MCPCB - EBest PCB","description":"Find out why S21 and S12 differ. Compare complex data, check both VNA directions, and distinguish PCB behavior from calibration or export errors.","canonical_url":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s21-vs-s12\/","robots":"max-image-preview:large","keywords":"","webmasterTools":{"miscellaneous":""},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"BlogPosting","@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s21-vs-s12\/#blogposting","name":"S21 vs. S12: Why Your VNA Traces Disagree on an RF PCB - PCB & MCPCB - EBest PCB","headline":"S21 vs. S12: Why Your VNA Traces Disagree on an RF PCB","author":{"@id":"https:\/\/www.bestpcbs.com\/blog\/author\/gong588\/#author"},"publisher":{"@id":"https:\/\/www.bestpcbs.com\/blog\/#organization"},"image":{"@type":"ImageObject","url":"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2026\/11\/s21-vs-s12-feature.jpg","width":1200,"height":600},"datePublished":"2026-11-16T23:20:08+08:00","dateModified":"2026-11-17T01:10:37+08:00","inLanguage":"en-US","mainEntityOfPage":{"@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s21-vs-s12\/#webpage"},"isPartOf":{"@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s21-vs-s12\/#webpage"},"articleSection":"bestpcb, S-parameter reciprocity, S21 vs S12, Touchstone Files, vna calibration"},{"@type":"BreadcrumbList","@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s21-vs-s12\/#breadcrumblist","itemListElement":[{"@type":"ListItem","@id":"https:\/\/www.bestpcbs.com\/blog\/#listItem","position":1,"name":"Home","item":"https:\/\/www.bestpcbs.com\/blog\/","nextItem":{"@type":"ListItem","@id":"https:\/\/www.bestpcbs.com\/blog\/category\/bestpcb\/#listItem","name":"bestpcb"}},{"@type":"ListItem","@id":"https:\/\/www.bestpcbs.com\/blog\/category\/bestpcb\/#listItem","position":2,"name":"bestpcb","item":"https:\/\/www.bestpcbs.com\/blog\/category\/bestpcb\/","nextItem":{"@type":"ListItem","@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s21-vs-s12\/#listItem","name":"S21 vs. S12: Why Your VNA Traces Disagree on an RF PCB"},"previousItem":{"@type":"ListItem","@id":"https:\/\/www.bestpcbs.com\/blog\/#listItem","name":"Home"}},{"@type":"ListItem","@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s21-vs-s12\/#listItem","position":3,"name":"S21 vs. S12: Why Your VNA Traces Disagree on an RF PCB","previousItem":{"@type":"ListItem","@id":"https:\/\/www.bestpcbs.com\/blog\/category\/bestpcb\/#listItem","name":"bestpcb"}}]},{"@type":"Organization","@id":"https:\/\/www.bestpcbs.com\/blog\/#organization","name":"PCB & MCPCB - Best Technology","description":"More Technical Details & News on PCB, MCPCB & Ceramic PCB from EBest PCB","url":"https:\/\/www.bestpcbs.com\/blog\/","telephone":"+8675529091601","logo":{"@type":"ImageObject","url":"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2025\/08\/logo.png","@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s21-vs-s12\/#organizationLogo"},"image":{"@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s21-vs-s12\/#organizationLogo"},"sameAs":["https:\/\/www.facebook.com\/Bestpcbs1","https:\/\/twitter.com\/bestpcbs","https:\/\/www.youtube.com\/channel\/UCJsTR02i6mtLFnBBNC_i4bQ\/featured","https:\/\/www.linkedin.com\/company\/best-pcb-technology"]},{"@type":"Person","@id":"https:\/\/www.bestpcbs.com\/blog\/author\/gong588\/#author","url":"https:\/\/www.bestpcbs.com\/blog\/author\/gong588\/","name":"mingling, gong","image":{"@type":"ImageObject","@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s21-vs-s12\/#authorImage","url":"https:\/\/secure.gravatar.com\/avatar\/37717913504b7ea1df97ec73d58a7bcc?s=96&d=mm&r=g","width":96,"height":96,"caption":"mingling, gong"}},{"@type":"WebPage","@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s21-vs-s12\/#webpage","url":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s21-vs-s12\/","name":"S21 vs. S12: Why Your VNA Traces Disagree on an RF PCB - PCB & MCPCB - EBest PCB","description":"Find out why S21 and S12 differ. Compare complex data, check both VNA directions, and distinguish PCB behavior from calibration or export errors.","inLanguage":"en-US","isPartOf":{"@id":"https:\/\/www.bestpcbs.com\/blog\/#website"},"breadcrumb":{"@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s21-vs-s12\/#breadcrumblist"},"author":{"@id":"https:\/\/www.bestpcbs.com\/blog\/author\/gong588\/#author"},"creator":{"@id":"https:\/\/www.bestpcbs.com\/blog\/author\/gong588\/#author"},"image":{"@type":"ImageObject","url":"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2026\/11\/s21-vs-s12-feature.jpg","@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s21-vs-s12\/#mainImage","width":1200,"height":600},"primaryImageOfPage":{"@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s21-vs-s12\/#mainImage"},"datePublished":"2026-11-16T23:20:08+08:00","dateModified":"2026-11-17T01:10:37+08:00"},{"@type":"WebSite","@id":"https:\/\/www.bestpcbs.com\/blog\/#website","url":"https:\/\/www.bestpcbs.com\/blog\/","name":"PCB & MCPCB - Best Technology","description":"More Technical Details & News on PCB, MCPCB & Ceramic PCB from EBest PCB","inLanguage":"en-US","publisher":{"@id":"https:\/\/www.bestpcbs.com\/blog\/#organization"}}]},"og:locale":"en_US","og:site_name":"PCB &amp; MCPCB - EBest PCB - More Technical Details &amp; News on PCB, MCPCB &amp; Ceramic PCB from EBest PCB","og:type":"article","og:title":"S21 vs. S12: Why Your VNA Traces Disagree on an RF PCB - PCB &amp; MCPCB - EBest PCB","og:description":"Find out why S21 and S12 differ. Compare complex data, check both VNA directions, and distinguish PCB behavior from calibration or export errors.","og:url":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s21-vs-s12\/","og:image":"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2025\/08\/logo.png","og:image:secure_url":"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2025\/08\/logo.png","article:published_time":"2026-11-16T15:20:08+00:00","article:modified_time":"2026-11-16T17:10:37+00:00","article:publisher":"https:\/\/www.facebook.com\/Bestpcbs1","twitter:card":"summary_large_image","twitter:site":"@bestpcbs","twitter:title":"S21 vs. S12: Why Your VNA Traces Disagree on an RF PCB - PCB &amp; MCPCB - EBest PCB","twitter:description":"Find out why S21 and S12 differ. Compare complex data, check both VNA directions, and distinguish PCB behavior from calibration or export errors.","twitter:creator":"@bestpcbs","twitter:image":"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2016\/02\/logo.gif"},"aioseo_meta_data":{"post_id":"39191","title":null,"description":null,"keywords":null,"keyphrases":{"focus":[],"additional":[]},"primary_term":null,"canonical_url":null,"og_title":null,"og_description":null,"og_object_type":"default","og_image_type":"default","og_image_url":null,"og_image_width":null,"og_image_height":null,"og_image_custom_url":null,"og_image_custom_fields":null,"og_video":null,"og_custom_url":null,"og_article_section":null,"og_article_tags":null,"twitter_use_og":false,"twitter_card":"default","twitter_image_type":"default","twitter_image_url":null,"twitter_image_custom_url":null,"twitter_image_custom_fields":null,"twitter_title":null,"twitter_description":null,"schema":{"blockGraphs":[],"customGraphs":[],"default":{"data":{"Article":[],"Course":[],"Dataset":[],"FAQPage":[],"Movie":[],"Person":[],"Product":[],"ProductReview":[],"Car":[],"Recipe":[],"Service":[],"SoftwareApplication":[],"WebPage":[]},"graphName":"BlogPosting","isEnabled":true},"graphs":[]},"schema_type":"default","schema_type_options":null,"pillar_content":false,"robots_default":true,"robots_noindex":false,"robots_noarchive":false,"robots_nosnippet":false,"robots_nofollow":false,"robots_noimageindex":false,"robots_noodp":false,"robots_notranslate":false,"robots_max_snippet":null,"robots_max_videopreview":null,"robots_max_imagepreview":"large","priority":null,"frequency":null,"local_seo":null,"breadcrumb_settings":null,"limit_modified_date":false,"ai":null,"created":"2026-11-16 15:20:12","updated":"2026-11-17 00:44:18","seo_analyzer_scan_date":null,"focus_keyword":null,"additional_keywords":null,"truseo_locale":null},"aioseo_breadcrumb":"<div class=\"aioseo-breadcrumbs\"><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/www.bestpcbs.com\/blog\/\" title=\"Home\">Home<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">\u00bb<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/www.bestpcbs.com\/blog\/category\/bestpcb\/\" title=\"bestpcb\">bestpcb<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">\u00bb<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\tS21 vs. S12: Why Your VNA Traces Disagree on an RF PCB\n\t\t<\/span><\/div>","aioseo_breadcrumb_json":[{"label":"Home","link":"https:\/\/www.bestpcbs.com\/blog\/"},{"label":"bestpcb","link":"https:\/\/www.bestpcbs.com\/blog\/category\/bestpcb\/"},{"label":"S21 vs. S12: Why Your VNA Traces Disagree on an RF PCB","link":"https:\/\/www.bestpcbs.com\/blog\/2026\/11\/s21-vs-s12\/"}],"_links":{"self":[{"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/posts\/39191","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/users\/32827"}],"replies":[{"embeddable":true,"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/comments?post=39191"}],"version-history":[{"count":2,"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/posts\/39191\/revisions"}],"predecessor-version":[{"id":39215,"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/posts\/39191\/revisions\/39215"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/media\/39190"}],"wp:attachment":[{"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/media?parent=39191"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/categories?post=39191"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/tags?post=39191"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}