{"id":37474,"date":"2026-10-16T17:29:58","date_gmt":"2026-10-16T09:29:58","guid":{"rendered":"https:\/\/www.bestpcbs.com\/blog\/?p=37474"},"modified":"2026-10-16T17:30:10","modified_gmt":"2026-10-16T09:30:10","slug":"diplexer-vs-duplexer","status":"publish","type":"post","link":"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer-vs-duplexer\/","title":{"rendered":"Diplexer vs Duplexer: Differences and RF Selection"},"content":{"rendered":"<div id=\"ez-toc-container\" class=\"ez-toc-v2_0_85 ez-toc-wrap-left counter-hierarchy ez-toc-counter ez-toc-grey ez-toc-container-direction\">\n<div class=\"ez-toc-title-container\">\n<p class=\"ez-toc-title\" style=\"cursor:inherit\">Table of Contents<\/p>\n<span class=\"ez-toc-title-toggle\"><a href=\"#\" class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" aria-label=\"Toggle Table of Content\"><span class=\"ez-toc-js-icon-con\"><span class=\"\"><span class=\"eztoc-hide\" style=\"display:none;\">Toggle<\/span><span class=\"ez-toc-icon-toggle-span\"><svg style=\"fill: #999;color:#999\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" class=\"list-377408\" width=\"20px\" height=\"20px\" viewBox=\"0 0 24 24\" fill=\"none\"><path d=\"M6 6H4v2h2V6zm14 0H8v2h12V6zM4 11h2v2H4v-2zm16 0H8v2h12v-2zM4 16h2v2H4v-2zm16 0H8v2h12v-2z\" fill=\"currentColor\"><\/path><\/svg><svg style=\"fill: #999;color:#999\" class=\"arrow-unsorted-368013\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" width=\"10px\" height=\"10px\" viewBox=\"0 0 24 24\" version=\"1.2\" baseProfile=\"tiny\"><path d=\"M18.2 9.3l-6.2-6.3-6.2 6.3c-.2.2-.3.4-.3.7s.1.5.3.7c.2.2.4.3.7.3h11c.3 0 .5-.1.7-.3.2-.2.3-.5.3-.7s-.1-.5-.3-.7zM5.8 14.7l6.2 6.3 6.2-6.3c.2-.2.3-.5.3-.7s-.1-.5-.3-.7c-.2-.2-.4-.3-.7-.3h-11c-.3 0-.5.1-.7.3-.2.2-.3.5-.3.7s.1.5.3.7z\"\/><\/svg><\/span><\/span><\/span><\/a><\/span><\/div>\n<nav><ul class='ez-toc-list ez-toc-list-level-1 ' ><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer-vs-duplexer\/#Key_Takeaways\" >Key Takeaways<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer-vs-duplexer\/#What_Is_the_Main_Difference_Between_a_Diplexer_and_a_Duplexer\" >What Is the Main Difference Between a Diplexer and a Duplexer?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer-vs-duplexer\/#How_Does_a_Diplexer_Filter_Route_Two_Frequency_Bands\" >How Does a Diplexer Filter Route Two Frequency Bands?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-4\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer-vs-duplexer\/#Does_a_Duplexer_Use_the_Same_Transmit_and_Receive_Frequency\" >Does a Duplexer Use the Same Transmit and Receive Frequency?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-5\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer-vs-duplexer\/#Do_You_Need_a_Duplexer_for_a_Repeater\" >Do You Need a Duplexer for a Repeater?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-6\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer-vs-duplexer\/#How_Much_Isolation_Does_the_RF_System_Need\" >How Much Isolation Does the RF System Need?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-7\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer-vs-duplexer\/#Which_Specifications_Should_You_Compare_Before_Selecting_a_Device\" >Which Specifications Should You Compare Before Selecting a Device?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-8\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer-vs-duplexer\/#What_PCB_Layout_Issues_Can_Reduce_Isolation\" >What PCB Layout Issues Can Reduce Isolation?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-9\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer-vs-duplexer\/#How_Should_You_Test_the_Assembled_RF_Paths\" >How Should You Test the Assembled RF Paths?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-10\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer-vs-duplexer\/#FAQ_About_Diplexer_vs_Duplexer\" >FAQ About Diplexer vs Duplexer<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-11\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer-vs-duplexer\/#How_Can_EBest_Circuit_Support_Your_RF_PCB_Assembly\" >How Can EBest Circuit Support Your RF PCB Assembly?<\/a><\/li><\/ul><\/nav><\/div>\n<div class=\"yzp-no-index\"><\/div><p><a href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer-vs-duplexer\/\">Diplexer vs duplexer<\/a> comes down to the job the RF network performs: a diplexer combines or separates two frequency bands at a common port, while a duplexer separates a transmitter and receiver sharing an antenna. A common filter-based duplexer uses different transmit and receive frequencies, not the same frequency. Both devices can be passive, and their circuit structures can overlap. Choose by the operating bands, insertion loss, isolation and power requirements\u2014not by the product name alone. On a PCB, grounding, matching and coupling between traces also determine whether the selected device delivers its specified performance.<\/p>\n<figure style=\"max-width:600px;margin:24px auto;\"><img decoding=\"async\" alt=\"Illustrative RF diplexer module and cavity duplexer shown side by side\" src=\"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2026\/10\/diplexer-vs-duplexer-hero.jpg\" style=\"width:100%;max-width:600px;max-height:400px;height:auto;object-fit:contain;\"\/><\/figure>\n<h2 style=\"font-size:26px;line-height:1.35;margin-top:32px;\"><span class=\"ez-toc-section\" id=\"Key_Takeaways\"><\/span>Key Takeaways<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<ul>\n<li>Diplexer vs duplexer is primarily a distinction between <strong>frequency-band routing and transmit\/receive separation<\/strong>, not between passive and active components.<\/li>\n<li>A diplexer filter connects two frequency-selective branches to one common port; signals can travel in either direction through a suitable reciprocal network.<\/li>\n<li>Most familiar frequency-division duplex (FDD) filter duplexers use separate TX and RX bands. Sharing an antenna does not mean sharing one frequency.<\/li>\n<li>A shared-antenna repeater needs enough isolation to prevent transmitter leakage and noise from degrading reception.<\/li>\n<li>A splitter divides power over a shared frequency range; a diplexer routes different bands and does not inherently impose a 3 dB power split.<\/li>\n<li>Insertion loss, return loss, port-to-port isolation, power handling and operating temperature must be checked against the actual band plan.<\/li>\n<li>PCB trace coupling can bypass a filter. Verify the assembled RF path, not just the component datasheet.<\/li>\n<\/ul>\n<h2 style=\"font-size:26px;line-height:1.35;margin-top:32px;\"><span class=\"ez-toc-section\" id=\"What_Is_the_Main_Difference_Between_a_Diplexer_and_a_Duplexer\"><\/span>What Is the Main Difference Between a Diplexer and a Duplexer?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>A diplexer separates signals by frequency band; a duplexer provides the transmit\/receive separation needed by a shared-antenna radio. These descriptions identify different functions, so the terms are not always mutually exclusive.<\/p>\n<div class=\"wp-block-table\">\n<table style=\"width:100%;border-collapse:collapse;\">\n<tbody>\n<tr>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\"><strong>Feature<\/strong><\/td>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\"><strong>Diplexer<\/strong><\/td>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\"><strong>Filter-based duplexer<\/strong><\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\">Main function<\/td>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\">Combine or separate two frequency bands<\/td>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\">Separate TX and RX paths at one antenna<\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\">Typical port labels<\/td>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\">Common, low band, high band<\/td>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\">Antenna, TX, RX<\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\">Frequency relationship<\/td>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\">Two distinct passbands<\/td>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\">Paired TX and RX bands in an FDD system<\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\">Selection priority<\/td>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\">Passband coverage, loss and branch isolation<\/td>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\">TX\/RX isolation, loss and transmitter power<\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\">Example use<\/td>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\">Two radio bands sharing a feedline<\/td>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\">Cellular front end or shared-antenna repeater<\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\">Possible construction<\/td>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\">LC, distributed, ceramic or other filter networks<\/td>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\">SAW, BAW, cavity or other suitable filter networks<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>TDK&#8217;s terminology guidance distinguishes band separation from transmission\/reception separation. In practice, a frequency-selective network may serve both roles. Check the port diagram and specifications whenever a supplier uses the names differently.<\/p>\n<p>At <a href=\"https:\/\/www.bestpcbs.com\/\">EBest Circuit<\/a>, we support the PCB fabrication and assembly work around RF components. Our <a href=\"https:\/\/www.bestpcbs.com\/products\/RF-board.htm\">RF PCB manufacturing<\/a> support connects the approved laminate, stackup and impedance requirements to the board that carries the filter network.<\/p>\n<h2 style=\"font-size:26px;line-height:1.35;margin-top:32px;\"><span class=\"ez-toc-section\" id=\"How_Does_a_Diplexer_Filter_Route_Two_Frequency_Bands\"><\/span>How Does a Diplexer Filter Route Two Frequency Bands?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>A diplexer filter sends each frequency band through its intended branch while rejecting that band at the other branch. The common port carries both bands together. Our <a href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer\/\">diplexer guide<\/a> explains the filter arrangement, circuit diagram and component specifications in more detail.<\/p>\n<p>For example, Mini-Circuits&#8217; DPGE-252-492R+ is specified for 2.4\u20132.5 GHz and 4.9\u20135.95 GHz. Those passbands illustrate band routing: the lower-band radio and higher-band radio connect to different branches, while a suitable shared antenna or feedline connects to the common port.<\/p>\n<ul>\n<li><strong>Combining:<\/strong> each branch feeds its band toward the common port.<\/li>\n<li><strong>Separating:<\/strong> the common-port signal is filtered into the two branches.<\/li>\n<li><strong>Isolation:<\/strong> attenuation between branches limits unwanted interaction between the connected circuits.<\/li>\n<\/ul>\n<p>The filter does not shift a signal to a different frequency. A 2.4 GHz input stays at 2.4 GHz; it is routed, not converted.<\/p>\n<figure style=\"max-width:600px;margin:24px auto;\"><img decoding=\"async\" alt=\"Two frequency bands combine at a diplexer common port through separate filter branches\" src=\"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2026\/10\/diplexer-frequency-paths.jpg\" style=\"width:100%;max-width:600px;max-height:400px;height:auto;object-fit:contain;\"\/><\/figure>\n<h2 style=\"font-size:26px;line-height:1.35;margin-top:32px;\"><span class=\"ez-toc-section\" id=\"Does_a_Duplexer_Use_the_Same_Transmit_and_Receive_Frequency\"><\/span>Does a Duplexer Use the Same Transmit and Receive Frequency?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>A conventional FDD filter duplexer uses different transmit and receive bands. It allows both paths to operate simultaneously through a shared antenna while filtering unwanted energy between them.<\/p>\n<p>Qorvo&#8217;s TQQ7101 is a documented BAW duplexer example covering 1,920\u20131,980 MHz and 2,110\u20132,170 MHz in a 3 \u00d7 3 mm package. It is discontinued and is cited here only to show a real frequency plan\u2014not as a recommendation for a new BOM. Uplink and downlink exchange TX\/RX roles depending on whether the equipment is a handset or a base station.<\/p>\n<p>Same-frequency simultaneous transmission and reception require a different isolation strategy, potentially including nonreciprocal routing and self-interference cancellation. A pair of ordinary band filters cannot distinguish two signals occupying the same frequency solely by which direction they travel.<\/p>\n<figure style=\"max-width:600px;margin:24px auto;\"><img decoding=\"async\" alt=\"Separate 1920 to 1980 MHz and 2110 to 2170 MHz bands in an example FDD frequency plan\" src=\"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2026\/10\/fdd-duplexer-frequency-plan.jpg\" style=\"width:100%;max-width:600px;max-height:400px;height:auto;object-fit:contain;\"\/><\/figure>\n<h2 style=\"font-size:26px;line-height:1.35;margin-top:32px;\"><span class=\"ez-toc-section\" id=\"Do_You_Need_a_Duplexer_for_a_Repeater\"><\/span>Do You Need a Duplexer for a Repeater?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>A repeater that transmits and receives simultaneously through one antenna normally needs a duplexer or another engineered isolation arrangement. Separate antennas can provide part of the isolation, but their separation alone does not guarantee acceptable receiver performance.<\/p>\n<p>The receiver must detect a weak wanted signal while a nearby transmitter produces much greater RF power. Two checks matter:<\/p>\n<ul>\n<li><strong>TX carrier rejection:<\/strong> keep the strong transmit signal from overloading the receiver front end.<\/li>\n<li><strong>TX noise rejection in the receive band:<\/strong> keep transmitter noise from raising the receiver&#8217;s effective noise floor.<\/li>\n<\/ul>\n<p>A broad VHF\/UHF diplexer is therefore not an automatic substitute for a duplexer serving a closely spaced pair of repeater channels. Its passbands may route both repeater frequencies through the same branch.<\/p>\n<h2 style=\"font-size:26px;line-height:1.35;margin-top:32px;\"><span class=\"ez-toc-section\" id=\"How_Much_Isolation_Does_the_RF_System_Need\"><\/span>How Much Isolation Does the RF System Need?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Required isolation comes from transmitter power and the receiver&#8217;s allowed interference level at the frequency being evaluated; there is no single correct isolation value for every diplexer or duplexer.<\/p>\n<p>For a simple carrier-leakage estimate:<\/p>\n<p><strong>Required isolation (dB) = TX power (dBm) \u2212 allowed leakage at RX (dBm).<\/strong><\/p>\n<p>If a hypothetical transmitter produces +30 dBm and the chosen receiver limit at that interferer frequency is \u221230 dBm, the path needs at least 60 dB isolation before adding design margin. With only 40 dB isolation, the estimated leakage would be \u221210 dBm. These are calculation inputs, not universal receiver limits or EBest Circuit test results.<\/p>\n<p>This estimate does not replace a receiver blocking or desensitization test. Transmitter noise inside the RX band, antenna mismatch and coupling around the filter require separate evaluation.<\/p>\n<figure style=\"max-width:600px;margin:24px auto;\"><img decoding=\"async\" alt=\"Illustrative isolation calculation showing plus 30 dBm transmitter power minus 60 dB isolation equals minus 30 dBm leakage\" src=\"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2026\/10\/duplexer-isolation-example.jpg\" style=\"width:100%;max-width:600px;max-height:400px;height:auto;object-fit:contain;\"\/><\/figure>\n<h2 style=\"font-size:26px;line-height:1.35;margin-top:32px;\"><span class=\"ez-toc-section\" id=\"Which_Specifications_Should_You_Compare_Before_Selecting_a_Device\"><\/span>Which Specifications Should You Compare Before Selecting a Device?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Compare the complete passbands, loss, isolation, power rating and impedance first, then check the package and assembly requirements. Matching the advertised center frequency alone is insufficient.<\/p>\n<div class=\"wp-block-table\">\n<table style=\"width:100%;border-collapse:collapse;\">\n<tbody>\n<tr>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\"><strong>Parameter<\/strong><\/td>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\"><strong>Selection basis<\/strong><\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\">Passband, MHz or GHz<\/td>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\">Both occupied bands, including band edges and tolerances<\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\">Insertion loss, dB<\/td>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\">TX output budget and RX sensitivity budget across each band<\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\">Isolation \/ rejection, dB<\/td>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\">Specified port pair and frequency; check TX and RX bands separately<\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\">Return loss \/ VSWR<\/td>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\">Matching at every relevant port under specified terminations<\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\">Power, W or dBm<\/td>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\">Average and peak power, duty cycle, temperature and mismatch conditions<\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\">Reference impedance, \u03a9<\/td>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\">50 \u03a9 or 75 \u03a9 system compatibility as applicable<\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\">Package and mounting<\/td>\n<td style=\"border:1px solid #cbd5e1;padding:10px;text-align:left;vertical-align:top;\">Land pattern, grounding, reflow compatibility and mechanical envelope<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>For scale, 1 dB of insertion loss passes about 79% of the incident power; 3 dB passes about 50%. Those ratios follow 10<sup>\u2212loss\/10<\/sup>. On a receiver, loss ahead of the first amplifier also consumes sensitivity margin.<\/p>\n<p>If the system alternates TX and RX in time, evaluate its TDD switch and filtering architecture rather than assuming an FDD duplexer is needed. If several different bands must coexist, a diplexer or higher-order multiplexer may belong ahead of individual band-specific front ends.<\/p>\n<h2 style=\"font-size:26px;line-height:1.35;margin-top:32px;\"><span class=\"ez-toc-section\" id=\"What_PCB_Layout_Issues_Can_Reduce_Isolation\"><\/span>What PCB Layout Issues Can Reduce Isolation?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Direct coupling between TX and RX traces, weak ground connections and mismatched launches can reduce assembled isolation even when the filter itself meets its datasheet.<\/p>\n<ul>\n<li><strong>Separate the paths:<\/strong> avoid long parallel TX and RX runs that create a bypass route around the component.<\/li>\n<li><strong>Maintain the reference plane:<\/strong> do not route RF traces across ground splits; keep return paths continuous.<\/li>\n<li><strong>Follow the land pattern:<\/strong> reproduce the specified signal pads, ground pads and local grounding arrangement.<\/li>\n<li><strong>Control transmission lines:<\/strong> calculate width and spacing from the actual stackup, dielectric properties and copper geometry.<\/li>\n<li><strong>Review shielding:<\/strong> ground a shield enclosure properly rather than treating a metal lid as an automatic isolation improvement.<\/li>\n<li><strong>Check assembly:<\/strong> inspect port orientation, bridges and ground-pad solder connections before troubleshooting the RF response.<\/li>\n<\/ul>\n<p>There is no universal \u201c50 \u03a9 trace width\u201d suitable for every board. A width copied from a reference layout can be wrong when the dielectric thickness or material changes. During our manufacturing review, the approved stackup and fabrication data need to describe the same controlled-impedance structure.<\/p>\n<h2 style=\"font-size:26px;line-height:1.35;margin-top:32px;\"><span class=\"ez-toc-section\" id=\"How_Should_You_Test_the_Assembled_RF_Paths\"><\/span>How Should You Test the Assembled RF Paths?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Use calibrated RF measurements to verify insertion loss, return loss and isolation on the assembled network, then check receiver performance with the transmitter operating under the intended conditions.<\/p>\n<ol>\n<li>Calibrate the vector network analyzer to the chosen reference planes and account for fixture or cable loss.<\/li>\n<li>Measure common-to-branch transmission across each passband.<\/li>\n<li>Measure branch-to-branch isolation across the required interference bands.<\/li>\n<li>Terminate unused ports in the specified impedance; an open port can change the network response.<\/li>\n<li>Verify powered-system behavior separately, including receiver desensitization and permitted TX power conditions.<\/li>\n<\/ol>\n<p>For a three-port device, label the ports before interpreting S-parameters: S21 only means transmission from port 1 to port 2, not automatically \u201cTX-to-antenna loss.\u201d Also check instrument dynamic range; an apparent isolation floor may belong to the fixture or instrument.<\/p>\n<figure style=\"max-width:600px;margin:24px auto;\"><img decoding=\"async\" alt=\"Three-port RF network measurement with two analyzer connections and the unused branch terminated\" src=\"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2026\/10\/three-port-rf-test.jpg\" style=\"width:100%;max-width:600px;max-height:400px;height:auto;object-fit:contain;\"\/><\/figure>\n<p>For <a href=\"https:\/\/www.bestpcbs.com\/products\/pcba.htm\">PCB assembly<\/a>, define the inspection scope and any required RF acceptance procedure before production. Electrical continuity and visual solder inspection do not establish an RF isolation result.<\/p>\n<h2 style=\"font-size:26px;line-height:1.35;margin-top:32px;\"><span class=\"ez-toc-section\" id=\"FAQ_About_Diplexer_vs_Duplexer\"><\/span>FAQ About Diplexer vs Duplexer<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p><strong>What is the duplexer meaning in an RF circuit?<\/strong><\/p>\n<p>A duplexer connects a transmitter and receiver to a shared antenna while providing separation between their paths. The implementation depends on the radio architecture; a common FDD version uses two frequency-selective filters.<\/p>\n<p><strong>Diplexer vs splitter: can they do the same job?<\/strong><\/p>\n<p>Not usually. A splitter distributes signals over a common frequency range, while a diplexer routes different bands to different ports. An ideal equal two-way splitter divides power by 3 dB per output before excess loss; a diplexer does not inherently make that equal power division.<\/p>\n<p><strong>Duplexer vs circulator: what is different?<\/strong><\/p>\n<p>A filter duplexer separates TX and RX using frequency selectivity. A circulator is nonreciprocal and routes energy sequentially between ports. Antenna reflections and finite isolation still matter, so a circulator alone does not guarantee adequate receiver protection or same-frequency full-duplex performance.<\/p>\n<p><strong>Are diplexers and duplexers active components?<\/strong><\/p>\n<p>Many are passive networks and need no DC supply. An integrated RF module may also contain powered amplifiers or control circuits. Check the module schematic rather than classifying the whole assembly from the filter name.<\/p>\n<p><strong>Can you tune every diplexer or duplexer?<\/strong><\/p>\n<p>No. Some cavity assemblies have adjustable resonators, while many surface-mount ceramic, SAW and BAW devices have fixed responses. Tune only devices intended for adjustment, using the manufacturer&#8217;s procedure and suitable RF instruments.<\/p>\n<p><strong>Can two parts with the same package be interchanged?<\/strong><\/p>\n<p>No. The port assignment, frequency plan, matching, power rating and soldering requirements must also agree. A matching body size is not evidence of electrical or footprint compatibility.<\/p>\n<h2 style=\"font-size:26px;line-height:1.35;margin-top:32px;\"><span class=\"ez-toc-section\" id=\"How_Can_EBest_Circuit_Support_Your_RF_PCB_Assembly\"><\/span>How Can EBest Circuit Support Your RF PCB Assembly?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>We support the board fabrication and assembly needed to turn an approved RF design into hardware. For diplexer or duplexer circuits, discuss the laminate and stackup, controlled-impedance requirements, component land patterns and assembly inspection scope with our team.<\/p>\n<p>Send your RF PCB or PCBA project to <a href=\"mailto:sales@bestpcbs.com\">sales@bestpcbs.com<\/a>. Include the component part numbers and any RF acceptance criteria so we can review the manufacturing requirements alongside the board design.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Compare diplexer vs duplexer functions, frequency bands, TX\/RX isolation and PCB layout requirements to select the right RF signal path.<\/p>\n","protected":false},"author":623,"featured_media":37469,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"_uf_show_specific_survey":0,"_uf_disable_surveys":false,"footnotes":""},"categories":[175,5789,7190],"tags":[8900,8903,8904,8905,8906],"class_list":["post-37474","post","type-post","status-publish","format-standard","hentry","category-best-pcb","category-pcb-design","category-rf-pcb","tag-diplexer-filter","tag-diplexer-vs-duplexer","tag-diplexer-vs-splitter","tag-duplexer-meaning","tag-duplexer-vs-circulator"],"acf":[],"aioseo_notices":[],"aioseo_head":"\n\t\t<!-- All in One SEO 4.9.10 - aioseo.com -->\n\t<meta name=\"description\" content=\"Compare diplexer vs duplexer functions, frequency bands, TX\/RX isolation and PCB layout requirements to select the right RF signal path.\" \/>\n\t<meta name=\"robots\" content=\"max-image-preview:large\" \/>\n\t<meta name=\"author\" content=\"Love PCB\"\/>\n\t<link rel=\"canonical\" href=\"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer-vs-duplexer\/\" \/>\n\t<meta name=\"generator\" content=\"All in One SEO (AIOSEO) 4.9.10\" \/>\n\t\t<meta property=\"og:locale\" content=\"en_US\" \/>\n\t\t<meta property=\"og:site_name\" content=\"PCB &amp; MCPCB - EBest PCB - More Technical Details &amp; News on PCB, MCPCB &amp; Ceramic PCB from EBest PCB\" \/>\n\t\t<meta property=\"og:type\" content=\"article\" \/>\n\t\t<meta property=\"og:title\" content=\"Diplexer vs Duplexer: Differences and RF Selection\" \/>\n\t\t<meta property=\"og:description\" content=\"Compare diplexer vs duplexer functions, frequency bands, TX\/RX isolation and PCB layout requirements to select the right RF signal path.\" \/>\n\t\t<meta property=\"og:url\" content=\"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer-vs-duplexer\/\" \/>\n\t\t<meta property=\"og:image\" content=\"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2025\/08\/logo.png\" \/>\n\t\t<meta property=\"og:image:secure_url\" content=\"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2025\/08\/logo.png\" \/>\n\t\t<meta property=\"article:published_time\" content=\"2026-10-16T09:29:58+00:00\" \/>\n\t\t<meta property=\"article:modified_time\" content=\"2026-10-16T09:30:10+00:00\" \/>\n\t\t<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/Bestpcbs1\" \/>\n\t\t<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n\t\t<meta name=\"twitter:site\" content=\"@bestpcbs\" \/>\n\t\t<meta name=\"twitter:title\" content=\"Diplexer vs Duplexer: Differences and RF Selection\" \/>\n\t\t<meta name=\"twitter:description\" content=\"Compare diplexer vs duplexer functions, frequency bands, TX\/RX isolation and PCB layout requirements to select the right RF signal path.\" \/>\n\t\t<meta name=\"twitter:creator\" content=\"@bestpcbs\" \/>\n\t\t<meta name=\"twitter:image\" content=\"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2016\/02\/logo.gif\" \/>\n\t\t<script type=\"application\/ld+json\" class=\"aioseo-schema\">\n\t\t\t{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"BlogPosting\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/10\\\/diplexer-vs-duplexer\\\/#blogposting\",\"name\":\"Diplexer vs Duplexer: Differences and RF Selection\",\"headline\":\"Diplexer vs Duplexer: Differences and RF Selection\",\"author\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/author\\\/seo\\\/#author\"},\"publisher\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/#organization\"},\"image\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/10\\\/diplexer-vs-duplexer-hero.jpg\",\"width\":1200,\"height\":800,\"caption\":\"Illustrative RF diplexer module and cavity duplexer shown side by side\"},\"datePublished\":\"2026-10-16T17:29:58+08:00\",\"dateModified\":\"2026-10-16T17:30:10+08:00\",\"inLanguage\":\"en-US\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/10\\\/diplexer-vs-duplexer\\\/#webpage\"},\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/10\\\/diplexer-vs-duplexer\\\/#webpage\"},\"articleSection\":\"best pcb, PCB Design, RF PCB, diplexer filter, diplexer vs duplexer, diplexer vs splitter, duplexer meaning, duplexer vs circulator\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/10\\\/diplexer-vs-duplexer\\\/#breadcrumblist\",\"itemListElement\":[{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog#listItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/category\\\/best-pcb\\\/#listItem\",\"name\":\"best pcb\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/category\\\/best-pcb\\\/#listItem\",\"position\":2,\"name\":\"best pcb\",\"item\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/category\\\/best-pcb\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/10\\\/diplexer-vs-duplexer\\\/#listItem\",\"name\":\"Diplexer vs Duplexer: Differences and RF Selection\"},\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog#listItem\",\"name\":\"Home\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/10\\\/diplexer-vs-duplexer\\\/#listItem\",\"position\":3,\"name\":\"Diplexer vs Duplexer: Differences and RF Selection\",\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/category\\\/best-pcb\\\/#listItem\",\"name\":\"best pcb\"}}]},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/#organization\",\"name\":\"PCB & MCPCB - Best Technology\",\"description\":\"More Technical Details & News on PCB, MCPCB & Ceramic PCB from EBest PCB\",\"url\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/\",\"telephone\":\"+8675529091601\",\"logo\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/wp-content\\\/uploads\\\/2025\\\/08\\\/logo.png\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/10\\\/diplexer-vs-duplexer\\\/#organizationLogo\"},\"image\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/10\\\/diplexer-vs-duplexer\\\/#organizationLogo\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/Bestpcbs1\",\"https:\\\/\\\/twitter.com\\\/bestpcbs\",\"https:\\\/\\\/www.youtube.com\\\/channel\\\/UCJsTR02i6mtLFnBBNC_i4bQ\\\/featured\",\"https:\\\/\\\/www.linkedin.com\\\/company\\\/best-pcb-technology\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/author\\\/seo\\\/#author\",\"url\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/author\\\/seo\\\/\",\"name\":\"Love PCB\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/10\\\/diplexer-vs-duplexer\\\/#authorImage\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/a7888223b6638d2aaf515046d034707e?s=96&d=mm&r=g\",\"width\":96,\"height\":96,\"caption\":\"Love PCB\"}},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/10\\\/diplexer-vs-duplexer\\\/#webpage\",\"url\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/10\\\/diplexer-vs-duplexer\\\/\",\"name\":\"Diplexer vs Duplexer: Differences and RF Selection\",\"description\":\"Compare diplexer vs duplexer functions, frequency bands, TX\\\/RX isolation and PCB layout requirements to select the right RF signal path.\",\"inLanguage\":\"en-US\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/#website\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/10\\\/diplexer-vs-duplexer\\\/#breadcrumblist\"},\"author\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/author\\\/seo\\\/#author\"},\"creator\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/author\\\/seo\\\/#author\"},\"image\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/10\\\/diplexer-vs-duplexer-hero.jpg\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/10\\\/diplexer-vs-duplexer\\\/#mainImage\",\"width\":1200,\"height\":800,\"caption\":\"Illustrative RF diplexer module and cavity duplexer shown side by side\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/2026\\\/10\\\/diplexer-vs-duplexer\\\/#mainImage\"},\"datePublished\":\"2026-10-16T17:29:58+08:00\",\"dateModified\":\"2026-10-16T17:30:10+08:00\"},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/#website\",\"url\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/\",\"name\":\"PCB & MCPCB - Best Technology\",\"description\":\"More Technical Details & News on PCB, MCPCB & Ceramic PCB from EBest PCB\",\"inLanguage\":\"en-US\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.bestpcbs.com\\\/blog\\\/#organization\"}}]}\n\t\t<\/script>\n\t\t<!-- All in One SEO -->\n\n","aioseo_head_json":{"title":"Diplexer vs Duplexer: Differences and RF Selection","description":"Compare diplexer vs duplexer functions, frequency bands, TX\/RX isolation and PCB layout requirements to select the right RF signal path.","canonical_url":"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer-vs-duplexer\/","robots":"max-image-preview:large","keywords":"","webmasterTools":{"miscellaneous":""},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"BlogPosting","@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer-vs-duplexer\/#blogposting","name":"Diplexer vs Duplexer: Differences and RF Selection","headline":"Diplexer vs Duplexer: Differences and RF Selection","author":{"@id":"https:\/\/www.bestpcbs.com\/blog\/author\/seo\/#author"},"publisher":{"@id":"https:\/\/www.bestpcbs.com\/blog\/#organization"},"image":{"@type":"ImageObject","url":"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2026\/10\/diplexer-vs-duplexer-hero.jpg","width":1200,"height":800,"caption":"Illustrative RF diplexer module and cavity duplexer shown side by side"},"datePublished":"2026-10-16T17:29:58+08:00","dateModified":"2026-10-16T17:30:10+08:00","inLanguage":"en-US","mainEntityOfPage":{"@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer-vs-duplexer\/#webpage"},"isPartOf":{"@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer-vs-duplexer\/#webpage"},"articleSection":"best pcb, PCB Design, RF PCB, diplexer filter, diplexer vs duplexer, diplexer vs splitter, duplexer meaning, duplexer vs circulator"},{"@type":"BreadcrumbList","@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer-vs-duplexer\/#breadcrumblist","itemListElement":[{"@type":"ListItem","@id":"https:\/\/www.bestpcbs.com\/blog#listItem","position":1,"name":"Home","item":"https:\/\/www.bestpcbs.com\/blog","nextItem":{"@type":"ListItem","@id":"https:\/\/www.bestpcbs.com\/blog\/category\/best-pcb\/#listItem","name":"best pcb"}},{"@type":"ListItem","@id":"https:\/\/www.bestpcbs.com\/blog\/category\/best-pcb\/#listItem","position":2,"name":"best pcb","item":"https:\/\/www.bestpcbs.com\/blog\/category\/best-pcb\/","nextItem":{"@type":"ListItem","@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer-vs-duplexer\/#listItem","name":"Diplexer vs Duplexer: Differences and RF Selection"},"previousItem":{"@type":"ListItem","@id":"https:\/\/www.bestpcbs.com\/blog#listItem","name":"Home"}},{"@type":"ListItem","@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer-vs-duplexer\/#listItem","position":3,"name":"Diplexer vs Duplexer: Differences and RF Selection","previousItem":{"@type":"ListItem","@id":"https:\/\/www.bestpcbs.com\/blog\/category\/best-pcb\/#listItem","name":"best pcb"}}]},{"@type":"Organization","@id":"https:\/\/www.bestpcbs.com\/blog\/#organization","name":"PCB & MCPCB - Best Technology","description":"More Technical Details & News on PCB, MCPCB & Ceramic PCB from EBest PCB","url":"https:\/\/www.bestpcbs.com\/blog\/","telephone":"+8675529091601","logo":{"@type":"ImageObject","url":"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2025\/08\/logo.png","@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer-vs-duplexer\/#organizationLogo"},"image":{"@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer-vs-duplexer\/#organizationLogo"},"sameAs":["https:\/\/www.facebook.com\/Bestpcbs1","https:\/\/twitter.com\/bestpcbs","https:\/\/www.youtube.com\/channel\/UCJsTR02i6mtLFnBBNC_i4bQ\/featured","https:\/\/www.linkedin.com\/company\/best-pcb-technology"]},{"@type":"Person","@id":"https:\/\/www.bestpcbs.com\/blog\/author\/seo\/#author","url":"https:\/\/www.bestpcbs.com\/blog\/author\/seo\/","name":"Love PCB","image":{"@type":"ImageObject","@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer-vs-duplexer\/#authorImage","url":"https:\/\/secure.gravatar.com\/avatar\/a7888223b6638d2aaf515046d034707e?s=96&d=mm&r=g","width":96,"height":96,"caption":"Love PCB"}},{"@type":"WebPage","@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer-vs-duplexer\/#webpage","url":"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer-vs-duplexer\/","name":"Diplexer vs Duplexer: Differences and RF Selection","description":"Compare diplexer vs duplexer functions, frequency bands, TX\/RX isolation and PCB layout requirements to select the right RF signal path.","inLanguage":"en-US","isPartOf":{"@id":"https:\/\/www.bestpcbs.com\/blog\/#website"},"breadcrumb":{"@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer-vs-duplexer\/#breadcrumblist"},"author":{"@id":"https:\/\/www.bestpcbs.com\/blog\/author\/seo\/#author"},"creator":{"@id":"https:\/\/www.bestpcbs.com\/blog\/author\/seo\/#author"},"image":{"@type":"ImageObject","url":"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2026\/10\/diplexer-vs-duplexer-hero.jpg","@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer-vs-duplexer\/#mainImage","width":1200,"height":800,"caption":"Illustrative RF diplexer module and cavity duplexer shown side by side"},"primaryImageOfPage":{"@id":"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer-vs-duplexer\/#mainImage"},"datePublished":"2026-10-16T17:29:58+08:00","dateModified":"2026-10-16T17:30:10+08:00"},{"@type":"WebSite","@id":"https:\/\/www.bestpcbs.com\/blog\/#website","url":"https:\/\/www.bestpcbs.com\/blog\/","name":"PCB & MCPCB - Best Technology","description":"More Technical Details & News on PCB, MCPCB & Ceramic PCB from EBest PCB","inLanguage":"en-US","publisher":{"@id":"https:\/\/www.bestpcbs.com\/blog\/#organization"}}]},"og:locale":"en_US","og:site_name":"PCB &amp; MCPCB - EBest PCB - More Technical Details &amp; News on PCB, MCPCB &amp; Ceramic PCB from EBest PCB","og:type":"article","og:title":"Diplexer vs Duplexer: Differences and RF Selection","og:description":"Compare diplexer vs duplexer functions, frequency bands, TX\/RX isolation and PCB layout requirements to select the right RF signal path.","og:url":"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer-vs-duplexer\/","og:image":"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2025\/08\/logo.png","og:image:secure_url":"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2025\/08\/logo.png","article:published_time":"2026-10-16T09:29:58+00:00","article:modified_time":"2026-10-16T09:30:10+00:00","article:publisher":"https:\/\/www.facebook.com\/Bestpcbs1","twitter:card":"summary_large_image","twitter:site":"@bestpcbs","twitter:title":"Diplexer vs Duplexer: Differences and RF Selection","twitter:description":"Compare diplexer vs duplexer functions, frequency bands, TX\/RX isolation and PCB layout requirements to select the right RF signal path.","twitter:creator":"@bestpcbs","twitter:image":"https:\/\/www.bestpcbs.com\/blog\/wp-content\/uploads\/2016\/02\/logo.gif"},"aioseo_meta_data":{"post_id":"37474","title":"Diplexer vs Duplexer: Differences and RF Selection","description":"Compare diplexer vs duplexer functions, frequency bands, TX\/RX isolation and PCB layout requirements to select the right RF signal path.","keywords":null,"keyphrases":{"focus":{"keyphrase":"diplexer vs duplexer","score":78,"analysis":{"keyphraseInTitle":{"score":9,"maxScore":9,"error":0},"keyphraseInDescription":{"score":9,"maxScore":9,"error":0},"keyphraseLength":{"score":9,"maxScore":9,"error":0,"length":3},"keyphraseInURL":{"score":5,"maxScore":5,"error":0},"keyphraseInIntroduction":{"score":9,"maxScore":9,"error":0},"keyphraseInSubHeadings":{"score":3,"maxScore":9,"error":1},"keyphraseInImageAlt":{"score":9,"maxScore":9,"error":0},"keywordDensity":{"score":0,"type":"low","maxScore":9,"error":1}}},"additional":[]},"primary_term":null,"canonical_url":null,"og_title":null,"og_description":null,"og_object_type":"default","og_image_type":"default","og_image_url":null,"og_image_width":null,"og_image_height":null,"og_image_custom_url":null,"og_image_custom_fields":null,"og_video":"","og_custom_url":null,"og_article_section":null,"og_article_tags":null,"twitter_use_og":false,"twitter_card":"default","twitter_image_type":"default","twitter_image_url":null,"twitter_image_custom_url":null,"twitter_image_custom_fields":null,"twitter_title":null,"twitter_description":null,"schema":{"blockGraphs":[],"customGraphs":[],"default":{"data":{"Article":[],"Course":[],"Dataset":[],"FAQPage":[],"Movie":[],"Person":[],"Product":[],"ProductReview":[],"Car":[],"Recipe":[],"Service":[],"SoftwareApplication":[],"WebPage":[]},"graphName":"BlogPosting","isEnabled":true},"graphs":[]},"schema_type":"default","schema_type_options":null,"pillar_content":false,"robots_default":true,"robots_noindex":false,"robots_noarchive":false,"robots_nosnippet":false,"robots_nofollow":false,"robots_noimageindex":false,"robots_noodp":false,"robots_notranslate":false,"robots_max_snippet":"-1","robots_max_videopreview":"-1","robots_max_imagepreview":"large","priority":0,"frequency":"default","local_seo":null,"breadcrumb_settings":null,"limit_modified_date":false,"ai":{"faqs":[],"keyPoints":[],"schemas":[],"titles":[],"descriptions":[],"socialPosts":{"email":{"subject":"","preview":"","content":""},"linkedin":[],"twitter":[],"facebook":[],"instagram":[]}},"created":"2026-10-16 09:11:11","updated":"2026-10-16 10:01:38","seo_analyzer_scan_date":null},"aioseo_breadcrumb":"<div class=\"aioseo-breadcrumbs\"><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/www.bestpcbs.com\/blog\" title=\"Home\">Home<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">\u00bb<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/www.bestpcbs.com\/blog\/category\/best-pcb\/\" title=\"best pcb\">best pcb<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">\u00bb<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\tDiplexer vs Duplexer: Differences and RF Selection\n\t\t<\/span><\/div>","aioseo_breadcrumb_json":[{"label":"Home","link":"https:\/\/www.bestpcbs.com\/blog"},{"label":"best pcb","link":"https:\/\/www.bestpcbs.com\/blog\/category\/best-pcb\/"},{"label":"Diplexer vs Duplexer: Differences and RF Selection","link":"https:\/\/www.bestpcbs.com\/blog\/2026\/10\/diplexer-vs-duplexer\/"}],"_links":{"self":[{"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/posts\/37474","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/users\/623"}],"replies":[{"embeddable":true,"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/comments?post=37474"}],"version-history":[{"count":2,"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/posts\/37474\/revisions"}],"predecessor-version":[{"id":37477,"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/posts\/37474\/revisions\/37477"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/media\/37469"}],"wp:attachment":[{"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/media?parent=37474"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/categories?post=37474"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.bestpcbs.com\/blog\/wp-json\/wp\/v2\/tags?post=37474"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}