


# How to Choose Copper Busbar Material?

_Published: 2025-09-01_

Table of Contents

Toggle

- What is Copper Busbar?
- Copper Busbar Material Datasheet
- Common Copper Busbar Material Grade & Properties
- How to Choose Copper Busbar Material?
- Difference between T1 and T2 Copper Busbar Material
- Why Choose EBest Circuit (Best Technology) as Copper Busbar PCB Supplier?
- Our Busbar PCB Capabilities
- How to Get a Quote for Busbar PCB Project?

How to choose **[copper busbar material](https://www.bestpcbs.com/blog/2025/09/how-to-choose-copper-busbar-material/)**? Let’s discover its material datasheet, material grades and properties, material selection guide, difference between T1 and T2 busbar material through this blog.

**Are you worried about these problems?**

- How to balance insufficient current-carrying capacity with cost?
- How to ensure lifespan under high-current conditions?
- Can non-standard designs be delivered quickly?

**EBest Circuit (Best Technology) can provide solutions:**

- High-Conductivity Copper: +15% conductivity with thinner design for cost reduction.
- Durable Protection: Tin/silver plating + passivation layer, 720h salt spray test.
- Agile Production: 3-day prototype delivery, supports 0.1mm precision adjustments.

**Welcome to contact us if you have any request for copper busbar: [sales@bestpcbs.com](mailto:sales@bestpcbs.com).**

## What is Copper Busbar?

**[Copper Busbar](https://www.bestpcbs.com/blog/2025/09/how-to-choose-copper-busbar-material/)** is a rectangular, circular, or tubular copper conductor used in power systems for high-current transmission. As a core component in busbar trunks and grounding systems, it directly carries large currents. Its advantages include high conductivity (superior to aluminum), thermal conductivity, corrosion resistance, and mechanical strength, supporting complex installation needs. Surfaces are often tin/silver-plated for enhanced durability.

[https://www.bestpcbs.com/blog/wp-content/uploads/2025/09/main.jpg](https://www.bestpcbs.com/blog/wp-content/uploads/2025/09/main.jpg)

## Copper Busbar Material Datasheet

**Parameter Category**
**T1/TU1 (Oxygen-Free Copper)**
**T2 (Grade 2 Copper)**
**T3 (Grade 3 Copper)**
**TMY (Hard-State Copper)**
**Tin-Plated Copper (T2 Base)**
**Silver-Plated Copper (T2 Base)**

Conductivity (%IACS)
≥101
≥100
≥98
≥97
≥98
≥99

Tensile Strength (MPa)
200–250
220–280
240–300
350–450
220–280
220–280

Elongation (%)
≥40
≥35
≥30
6–15
≥35
≥35

Hardness (HV)
40–60
45–65
50–70
100–120
45–65
45–65

Density (g/cm³)
8.94
8.89
8.85
8.89
8.89
8.89

Softening Temperature (°C)
200
190
180
150
190
190

Typical Standard
ASTM B152
GB/T 5585
GB/T 5231
IEC 60439
ASTM B33
ASTM B298

## Common Copper Busbar Material Grade & Properties

**T1 (Grade 1 Copper) / TU1 (Oxygen-Free Copper)**

- Properties: Ultra-high purity (≥99.95%), optimal conductivity/thermal conductivity, excellent plasticity (easy to bend/stretch), but low strength/hardness.
- Applications: Ultra-precision electrical instruments, high-frequency circuits, vacuum devices, superconducting equipment supports.

**T2 (Grade 2 Copper)**

- Properties: High purity (≥99.90%), good conductivity/thermal conductivity, excellent processability; contains trace oxygen (lower cost than T1).
- Applications: Most common copper busbar material. Used in power distribution systems (switchgear, transformers), high-current conductors, and busbar connections.

**T3 (Grade 3 Copper)**

- Properties: Purity ≥99.70%, slightly lower conductivity/thermal conductivity than T2, higher strength/hardness, good plasticity, lower cost.
- Applications: Cost-sensitive or moderate strength needs (e.g., general-purpose electrical connections).

**TMY (Hard-State Copper Busbar)**

- Properties: Typically T2 in hard (R) state. Cold-worked (rolled/drawn) for high strength/hardness, but reduced plasticity/conductivity.
- Applications: Structural supports, rigid connections, vibration-resistant components (common in distribution cabinets).

**Soft Copper (O-State Copper)**

- Properties: Annealed T2/TU1 in fully soft (O) state. Extremely pliable, highest conductivity (near-theoretical), but lowest strength.
- Applications: Flexible connections, complex-shaped components (e.g., jumpers, internal device soft links).

**Tin-Plated Copper**

- Properties: T2 copper with tin coating. Enhanced oxidation/corrosion resistance, improved solderability, stable contact resistance.
- Applications: Marine/outdoor equipment, high-humidity environments, tin-soldered connections.

**Silver-Plated Copper**

- Properties: Silver-coated copper. Superior conductivity (silver is best conductor), low/stable contact resistance, high corrosion/wear resistance.
- Applications: High-current/high-frequency contacts (e.g., HV switchgear, radar systems), sulfur-rich environments.

**Special Copper Alloys (e.g., Cd, Zr, Cr-Zr)**

- Properties: Copper with trace alloying elements (Cd, Zr, Cr). Slight conductivity loss for high strength/hardness, wear resistance, and elevated-temperature stability.
- Applications: High-stress/high-heat components (e.g., switch contacts, welding electrodes, furnace busbars).

[https://www.bestpcbs.com/blog/wp-content/uploads/2025/09/1.png](https://www.bestpcbs.com/blog/wp-content/uploads/2025/09/1.png)

## How to Choose Copper Busbar Material?

Below are selection guide to**[copper busbar material](https://www.bestpcbs.com/blog/2025/09/how-to-choose-copper-busbar-material/)**:

**1. Material Type and Conductivity**

**High-purity copper as the foundation**:

- Electrolytic Tough Pitch (ETP) copper (purity ≥99.9%) is the industry standard, offering ≥98% IACS conductivity for minimal energy loss.
- Oxygen-Free Electronic (OFE) copper (purity ≥99.99%) is ideal for high-frequency applications (e.g., RF systems) due to its ultra-low oxygen content (
