


# Industrial Motherboard Design, Industrial PCB Case Sharing

_Published: 2024-06-24_

Best technology engaging in the PCB manufacturing and PCB design for more than 17 years. With a strong R&D team, we can provide customers with fast and valued PCB design solutions. Here is one of our industrial motherboard design & industrial PCB case sharing for your reference. **If you want to get your own industrial PCB design, welcome to [contact us](https://www.bestpcbs.com/contact/index.htm). **

A mITX architecture industrial control motherboard

[1] Intel Xeon E3, Core™ i7/i5, Celeron G3900E processors

[2]：2x DDR4 SODIMM 2133 MHz (up to 32 GByte)

[3]：4x SATA Gen 3.0

[4]：1x PCIe x16 (Gen 3)

[5]：2x USB 3.0 (Internal) + 1x USB 3.0 (Client) + 2x USB 3.0 (Rear I/O) + 2x USB 2.0 (Rear I/O) +

2x USB 2.0 (Front Header) + 1x USB 2.0 (mPCIe)

[https://www.bestpcbs.com/blog/wp-content/uploads/2024/06/PCB-design-1.png](https://www.bestpcbs.com/blog/wp-content/uploads/2024/06/PCB-design-1.png)
[https://www.bestpcbs.com/blog/wp-content/uploads/2024/06/PCB-design-2.png](https://www.bestpcbs.com/blog/wp-content/uploads/2024/06/PCB-design-2.png)

## Industrial PCB Design Considerations

- Control the length of the circuit: Minimize the length of the circuit, especially the key signal lines, to reduce signal attenuation and delay.

- Avoid sharp angles and right angles: Right angles and sharp angles should be avoided when wiring, and rounded or 45 degree angles should be used as far as possible to reduce signal reflection and impedance discontinuity.

- Line width: Determine the line width according to the current size and thermal requirements to ensure the reliability and stability of the circuit.

- Inter-layer wiring: Rational use of multi-layer PCB inter-layer wiring, such as the signal line on the inner layer, power and ground wire on the outer layer.

- Impedance control: For high-speed signals, it is necessary to control the line impedance to ensure signal integrity, and carry out impedance matching design if necessary.

- Avoid cross and parallel wiring: Try to avoid cross and parallel wiring of signal lines to reduce crosstalk and electromagnetic interference.

Contact us if you have any questions and inquiry about industrial PCB design projects.
